Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Taylor, TX
Chimney repair in Taylor usually means dealing with brick flues built before modern liners existed. We’re talking early-1900s downtown homes with original masonry that has never seen a camera inspection, and mid-century ranch houses with factory-built fireplaces that need a different cleaning approach entirely. Ashton Chimney handles both. If you’ve got a chimney that hasn’t been looked at in years, call (855) 507-9184 and we’ll tell you what’s actually going on up there.
Why Taylor Homes Are Different
Taylor’s chimney problems follow the age of its housing stock. The historic homes north of downtown, along streets like West Seventh and Hackberry, were built with brick chimneys and clay tile liners. Those liners crack over decades of Williamson County heat cycling, and once cracked, they let heat and gases reach the framing. That’s a fire hazard, not a cosmetic issue. We find it on roughly half the pre-1950 chimneys we inspect in the 76574 ZIP code.
The mid-century ranch houses on Taylor’s south and east sides present a different set of problems. Their factory-built fireplaces work fine when the refractory panels are intact, but those panels degrade with use and age. We carry the Copperfield replacement panels that match most major manufacturers, so a damaged firebox doesn’t mean replacing the whole fireplace.
Taylor’s hot summers and mild winters also shape how chimneys fail here. When a fireplace sits unused through months of 95-degree heat, then gets lit during a January cold snap, the rapid temperature swing can glaze creosote inside the flue. Glazed creosote doesn’t brush out with standard sweeping tools. It takes rotary cleaning heads and chemical treatment, which is exactly why a standard sweep sometimes isn’t enough and why we always inspect before we clean.
Styles & brands we work with
Our Main Taylor Services
Taylor homeowners call us most often about two things: getting the fireplace ready for the few cold nights they’ll actually use it, and clearing dryer vents that haven’t been touched since the house was built. Both are fire-prevention work, and both get neglected for the same reason: out of sight, out of mind.
Chimney Sweep in Taylor
We see a pattern in Taylor every year. The first real cold front pushes through, and suddenly everyone remembers their fireplace exists. That’s when the calls come in, especially from the historic north side where original chimneys have gone years without inspection. A sweep removes the creosote, but the inspection is what catches cracked flue tiles before they become a chimney fire. Our full cleaning and 15-point inspection service is covered on its own page: Chimney Sweep in Taylor. That page explains what we check, what we remove, and what we photograph so you can see the before and after for yourself.
Dryer Vent Cleaning in Taylor
Taylor homes with laundry rooms on interior walls often have vent runs that pass through the center of the house, long and full of turns. Lint builds up at every bend. The National Fire Protection Association lists dryer vent buildup as a leading cause of dryer fires, and most Taylor homeowners we meet have never cleaned their vent once. We run a rotary brush the full length of the duct, then use a pressure check to confirm airflow. Details on what we do and how often Taylor’s climate demands it are on the dedicated page: Dryer Vent Cleaning in Taylor.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Taylor
Here’s the situation in Taylor: homes built before 1960 largely lack modern stainless liners, and the original clay tiles have been stressed by 50 to 100 years of thermal expansion and contraction. When we inspect a Taylor chimney, we’re looking specifically for cracked flue tiles, failed mortar crowns, and flashing that’s separated from the roofline. Chimney Repair is our primary trade, and we handle everything from a one-hour cap replacement to a full DuraFlex stainless reline. The repair work we do in Taylor is shaped by two local realities: older brick chimneys that need modernization, and the water damage that Williamson County rains force through broken crowns and flashing.
Chimney Cap Installation
Signs you need it
Water staining on the firebox floor or damp smells after rain usually mean an open flue is letting rain fall straight down the chimney.
What it costs in Taylor
Chimney cap installation in Taylor typically runs $300 to $600 for a standard stainless steel cap, depending on flue size and whether any minor masonry touch-up is needed.
How we do it
We measure the flue, install a properly sized stainless cap with a screened base to keep out rain, birds, and embers, then secure it with mechanical fasteners rated for prolonged heat exposure.
Chimney Liner Installation
Signs you need it
Cracked flue tiles visible during an inspection, or a chimney fire in the past, mean the flue can no longer safely contain heat and combustion gases.
What it costs in Taylor
A DuraFlex stainless liner installation in Taylor generally falls between $3,000 and $6,500 depending on flue height, liner diameter, and how much of the old tile needs removal.
How we do it
We run a camera inspection to document the damage, remove any obstructing masonry, then install a continuous DuraFlex stainless liner sized to the appliance and secured from the cap to the appliance connection.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, peeling wallpaper, or stained brick at the roofline are all classic signs of failed flashing.
What it costs in Taylor
Flashing repair in Taylor typically runs $600 to $1,200 for a standard repair, and $1,000 to $2,500 when we need to cut and replace the step flashing around a steep roof chase.
How we do it
We remove the old flashing and roofing material around the chimney, install new step and counter flashing in aluminum or copper, then seal every junction with a high-grade roof sealant.
What Chimney Repair Costs in Taylor
| Item | Typical range in Taylor |
|---|---|
| Chimney cap installation | $300 – $600 |
| Chimney crown repair | $119 – $1,000 |
| Chimney flashing repair | $1,000 – $2,500 |
Do I really need a new liner if my clay tiles are cracked?
Not always. Some Taylor chimneys with minor cracking qualify for HeatShield resurfacing, which coats the inside of the existing flue with a ceramic sealant rated for high heat. We’ll show you the camera footage and explain whether HeatShield is code-compliant for your setup or whether a full DuraFlex reline is the better path.
How long does chimney repair take in Taylor?
Most repairs, including cap installation, crown repair, and flashing work, are done in one visit. A full liner installation takes half a day and sometimes a second visit for sealing and follow-up inspection. We’ll give you a clear timeline before we start any work.
Brands We Service in Taylor
We stock and install Copperfield refractory panels for factory-built fireplaces, Gelco chimney caps, and DuraFlex stainless liner systems. We’re also HeatShield-certified for flue resurfacing, which gives Taylor homeowners a repair option between a basic sweep and a full reline. Most parts are on our trucks when we arrive. Our brands page breaks down which products we use and why.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Taylor, TX
| Service | Typical range in Taylor |
|---|---|
| Chimney sweep and inspection | $199 – $499 |
| Dryer vent cleaning | $149 – $289 |
| Chimney cap installation | $300 – $600 |
| Chimney crown repair | $119 – $1,000 |
| Chimney flashing repair | $1,000 – $2,500 |
| Chimney liner installation | $3,000 – $6,500 |
| HeatShield flue resurfacing | $800 – $2,500 |
| Chimney chase cover replacement | $1,000 – $2,500 |
In Taylor, prices tend to climb with roof height and chimney access. A two-story historic home with a steep roofline means scaffold setup and more labor than a single-story ranch with a walkable pitch. The quoted price is the price you pay – we write the scope of work before we start, and nothing gets added without your approval.
Neighborhoods We Serve in Taylor
We work all over the 76574 ZIP code, from the historic streets north of downtown to the newer developments off Carlos G. Parker Boulevard and the ranch-house subdivisions on the east side. Response times vary with our schedule, but most Taylor appointments are booked within two weeks depending on the season.
- Historic North Side
- Downtown Taylor
- Bull Branch
- Robinson Park area
- Mustang Creek
Service Area – Cities Near Taylor
Besides Taylor, we serve the surrounding Williamson County communities where our crews are already working most weeks. If you’re in Hutto, TX, Round Rock, TX, Pflugerville, TX, or Windemere, TX, the same team and the same pricing structure apply. Give us a call and we’ll get you on the schedule.
Serving Taylor, TX — Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Taylor
Most Taylor appointments are scheduled within one to two weeks. During the fall, after the first cold front, our calendar fills faster. If you want work done before burning season, call early in the fall, not the week you want to light the fireplace. We batch Taylor jobs by area and can sometimes offer shorter lead times if we’re already working nearby.
For most repairs, no. Replacing a cap, crown, flashing, or installing a liner does not require a city permit. If structural masonry work is needed, which would be a rare case for us, we’ll flag it and help you sort out what the city requires before any work begins.
Yes. We do pre-purchase chimney inspections for Taylor homebuyers. A camera inspection runs through the flue and gives you a clear picture of what you’re inheriting before closing. We can also give you a straight answer on what repairs would cost, so you can negotiate from a position of knowledge.
If you need chimney work in Taylor, call (855) 507-9184 for a free estimate. We’ll tell you what needs doing, what it’ll cost, and which materials we’d use – in plain language.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Taylor Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Cole Doyle"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Tyrone Ingram"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Nia Mosley