Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Brushy Creek, TX
Chimney repair in Brushy Creek usually comes down to wind and hail damage on prefab chimney caps, chase covers, and flashing, plus the occasional liner issue in a gas or wood-burning fireplace that hasn’t been inspected in years. Most homes in Brushy Creek were built between the 1990s and 2010s, so we’re typically working on factory-built metal fireplaces and masonry veneer chimneys rather than true masonry flues. The hot, humid Hill Country climate and spring storm season create a specific set of problems here that differ from older Austin neighborhoods. Call Ashton Chimney at (855) 507-9184 when you need a straight answer about what’s actually wrong and what it’ll take to fix it.
Why Brushy Creek Homes Are Different
Brushy Creek sits on the edge of the Texas Hill Country, a master-planned community where nearly every chimney we inspect is attached to a builder-grade home from the 1990s or later. The fireplaces here are mostly decorative features: factory-built fireboxes with metal flues, masonry veneer surrounds, and prefabricated caps. They’re not the heavy masonry chimneys you’d find in a 1950s bungalow, and that changes the repair work. We’re looking for rusted chase covers, dented caps from spring hail, and flashing that’s pulled away from the roofline after a windstorm.
The other thing Brushy Creek homeowners deal with is the compressed winter season. Fireplaces sit unused through the long hot stretch from April to November, collecting dust, wasp nests, and the occasional squirrel. When the first cold snap hits in December, everyone wants a sweep and inspection at once. That’s why we recommend booking in October or November, before the scramble starts. The humidity also plays a role: it accelerates rust on metal components, especially chase pans and damper assemblies that weren’t sealed properly at installation.
Styles & brands we work with
Our Main Brushy Creek Services
Brushy Creek homeowners call us most often for two things: chimney sweeps before or during the brief winter fire season, and dryer vent cleaning as a fire-safety precaution that most chimney companies don’t handle. Both are covered below.
Chimney Sweep in Brushy Creek
Most Brushy Creek chimneys are factory-built systems that get used a handful of times each winter, so the creosote buildup is usually light but the dust and pest debris can be significant after a long idle stretch. We remove the accumulated material, inspect the firebox, damper, flue, and cap, and tell you plainly whether anything needs follow-up repair. Spring hail damage to caps often shows up during these inspections, which is why a routine sweep in Brushy Creek frequently turns into a small repair call. Learn more about our Chimney Sweep in Brushy Creek service.
Dryer Vent Cleaning in Brushy Creek
Your dryer vent is a venting system too, and in Brushy Creek’s hot climate it moves a lot of lint-laden air through walls and attics where lint can accumulate. Clogged dryer vents are a leading cause of house fires, not just a drying-time nuisance. We clean the full run from dryer to exterior termination, check the vent cap for proper airflow, and confirm the duct is in good shape. This is a separate call from a chimney sweep, but it’s one we handle the same day when we’re already at the home. See Dryer Vent Cleaning in Brushy Creek for the full scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Brushy Creek
Chimney repair in Brushy Creek is usually storm-driven. Spring hail dents caps and chase covers, wind pulls flashing loose, and the humid months that follow let rust and water intrusion do the rest. Because most Brushy Creek chimneys are prefab systems with metal components, repairs are often straightforward parts replacement rather than masonry rebuilds. That’s where Chimney Repair work from Ashton Chimney comes in: we diagnose the failure, name the part, and install professional-grade replacements from Olympia Chimney, Famco, and Copperfield rather than whatever fits from a hardware store.
Chimney Cap Installation
Signs you need it
Water stains on the firebox ceiling, rust flakes falling into the firebox, or a visible dent from hail means the cap has failed and needs replacement.
What it costs in Brushy Creek
Chimney cap installation in Brushy Creek typically runs $160 to $350 depending on cap size, material, and whether the flue needs a custom bracket.
How we do it
We measure the flue opening, install a brand-name cap rated for the appliance type, secure it with mechanical fasteners, and test the draw before we leave.
Chimney Cap Replacement
Signs you need it
Dents from hail, torn mesh, a rusted-through top, or a cap that’s shifted off the flue are all reasons to replace rather than patch.
What it costs in Brushy Creek
Replacing a damaged cap in Brushy Creek generally falls between $160 and $350, with galvanized and stainless options affecting the final price.
How we do it
We remove the old cap, inspect the flue liner underneath for water damage, and install a correctly sized replacement with new hardware.
What Chimney Repair Costs in Brushy Creek
| Item | Typical range in Brushy Creek |
|---|---|
| Chimney cap installation | $160 – $350 |
| Chimney cap replacement | $160 – $350 |
| Chimney crown repair | $350 – $850 |
Do I need a new liner if my chimney cap failed?
Not automatically. The cap is the first line of defense, and a failed cap can sometimes lead to liner damage from water, but we’ll scope the flue and show you camera footage before recommending any liner work.
How long do chimney caps last in Brushy Creek?
In Brushy Creek’s hail-prone climate, a galvanized cap often lasts 5 to 8 years before hail or rust takes it out. Stainless caps hold up longer, which is worth considering if your roof catches frequent spring storms. Call (855) 507-9184 for an exact quote.
Brands We Service in Brushy Creek
We install and service parts from Olympia Chimney, Famco, and Copperfield. We stock common cap sizes and chase covers for the prefab systems found throughout Brushy Creek, so typical repairs don’t wait on a special order. See our brands for more on what we carry.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Brushy Creek, TX
| Service | Typical range in Brushy Creek |
|---|---|
| Chimney sweep | $175 – $275 |
| Chimney inspection | $125 – $250 |
| Chimney cap installation | $160 – $350 |
| Chimney cap replacement | $160 – $350 |
| Chimney crown repair | $350 – $850 |
| Chimney flashing repair | $250 – $500 |
| Dryer vent cleaning | $100 – $200 |
What pushes prices higher in Brushy Creek is roof pitch and cap accessibility. Steeper rooflines common in the subdivisions here mean more ladder time and more safety equipment. We give you an upfront price before work starts, not after, so you know the number before we climb.
Neighborhoods We Serve in Brushy Creek
We work throughout Brushy Creek’s planned subdivisions, from the older sections near Brushy Creek Lake Park to the newer builds further east. Typical response for a service call in the area is one to two business days when you book outside the December-to-February rush.
- Cat Hollow
- Ranch at Brushy Creek
- Brushy Creek North
- Brushy Creek West
- Village at Brushy Creek
Service Area – Cities Near Brushy Creek
Ashton Chimney is based in Cedar Park, TX and works regularly in Brushy Creek and the surrounding communities. We also serve Anderson Mill, TX, Jollyville, TX, and Wells Branch, TX. If you’re in a neighboring area and need a sweep, inspection, or repair, we’re likely already familiar with your street.
Serving Brushy Creek, TX — Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Brushy Creek
Most repairs like cap replacement, flashing repair, or crown work fall under routine maintenance and don’t require HOA approval in Brushy Creek, but any visible exterior change should be checked against your subdivision’s covenants. We can provide specs for your review.
Outside the December-to-February peak, we typically schedule within one to two business days. During peak season, plan a week or more ahead. October and November bookings avoid the seasonal wait entirely.
Yes. Most Brushy Creek homes with gas fireplaces have prefab venting systems that need the same cleaning and inspection discipline as wood-burning units. We clean and inspect the venting, check for corrosion, and confirm the termination cap is intact.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brushy Creek Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Tyrone Ingram"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Nia Mosley"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Alicia Hampton