Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Taylor
Dryer vent cleaning in Taylor, TX typically costs between $129 and $229 for a standard single-story home, with most jobs completed in under two hours. If your dryer is taking longer than one cycle to dry clothes, or if you smell a musty odor when the dryer runs, you likely have a clogged vent that needs professional attention. We serve all of Taylor’s 76574 zip code, from the historic district near downtown to the newer subdivisions off Carlos G. Parker Boulevard. Call (855) 507-9184 for a free estimate and we’ll schedule a visit that works around your schedule.
Why Ashton Chimney Is Taylor’s Preferred Dryer Vent Cleaning Company
Taylor homeowners call us because we understand the specific problems this area’s housing stock presents. Many homes in Taylor were built before modern venting codes, which means dryer vents often terminate in crawlspaces or attics rather than outside, a shortcut that creates lint buildup and moisture problems most dryer vent companies never check for. We know what to look for because we’ve worked through hundreds of Taylor homes and see the same patterns repeated.
Our team is led by Nolan Pruett, who has built Ashton Chimney around the principle that a dryer vent is a venting system requiring the same attention as a chimney. That might sound unusual coming from a chimney company, but it’s exactly why Taylor residents trust us. We approach dryer vent work with the same diagnostic mindset we use on flues: find the restriction, identify why it happened, fix it properly, and document the result.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Taylor
Every Taylor home gets a thorough cleaning that includes inspecting the full vent run, not just the accessible section behind the dryer. We use rotating brush systems sized to your specific duct diameter, and we always check termination points to confirm air exits where it should.
Dryer Vent Cleaning
Standard cleaning in Taylor involves removing the dryer, brushing the entire vent run from appliance to termination point, and vacuuming out all dislodged debris. We check airflow velocity before and after using an anemometer so you get measurable proof the vent is clear. If your vent terminates in an attic or crawlspace, we flag that immediately and explain your options for correcting it.
Dryer Vent Repair
Disconnected duct sections, crushed pipes, and improperly sealed joints are common in Taylor homes, especially in older structures where original vent runs were never upgraded. We repair or replace damaged sections using rigid metal duct or flexible transition products rated for dryer use, never foil tape or plastic that sag and collect lint. Every repair is confirmed with a post-repair airflow test.
Dryer Vent Installation
When a vent is too damaged to repair, or when a home never had a proper exterior termination, we install new vent runs that meet current code. For older Taylor homes where the original vent dumps into the attic, this means routing a new duct to an exterior wall or roof and sealing the old opening. We use professional-grade materials and secure every joint with mechanical fasteners, not tape.
Dryer Vent Cap Replacement
Taylor’s cedar season and summer storms leave exterior vent caps clogged with pollen, dust, and debris. A rusted or jammed damper restricts airflow and invites rodents into the duct. We stock replacement caps that seal tightly when the dryer isn’t running and open freely when it is, and we’ll check yours during every cleaning regardless of whether you asked us to.
Trusted Brands We Service in Taylor
We specify products from manufacturers that make components for professional venting work, not off-the-shelf substitutes. When we install a transition duct, we use DuraFlex products because they hold their shape and resist the sagging that traps lint. For exterior termination caps and dampers, we turn to Famco and Copperfield, two names that have earned their place in the trade. These are the same materials we’d put in our own homes, and we’ll tell you exactly which products went into your vent run and why.
Common Dryer Vent Cleaning Problems We See in Taylor Homes
- Attic and crawlspace terminations. A large number of pre-1950 homes in Taylor have dryer vents that never reach the outdoors. Lint and moisture accumulate in enclosed spaces, damaging framing and creating conditions for mold. We correct these by routing vents to proper exterior terminations.
- Sagging foil transition ducts. Mid-century ranch houses throughout Taylor often still have the original flexible foil connector behind the dryer. These ducts sag under their own weight, lint packs into the low spots, and airflow drops until the dryer overheats. We replace them with rigid or semi-rigid metal connectors.
- Clogged exterior caps from cedar debris. Taylor’s cedar fever season fills the air with fine debris that collects on vent caps and dampers. By late spring, we see caps so matted with pollen and dust that the damper can’t open. A quick cap cleaning restores airflow, but the real fix is a cap design that sheds debris better.
- Separated joints inside walls. We recently cleared a clogged dryer vent in a 1920s bungalow off N. Main Street where the homeowner reported clothes taking two cycles to dry. Our tech found the vent pipe had separated inside the wall, dumping lint into the wall cavity. We reconnected it with a DuraFlex transition duct and installed a proper exterior vent cap to keep rodents out.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Taylor, TX
A standard dryer vent cleaning in Taylor runs $129 to $179 for a single-story home with an accessible exterior termination. Two-story homes or vents that terminate on the roof add time and access equipment, typically bringing the total to $200 to $279. If your vent terminates in the attic or crawlspace and needs to be rerouted, installation work starts at $350 and depends on the length of the new run and wall access. Replacement transition ducts run $45 to $75. Every job includes a written airflow measurement before and after, and we’ll never recommend work you don’t need. Call (855) 507-9184 for a free estimate specific to your home.
We Also Serve Cities Near Taylor
Ashton Chimney works throughout Williamson County, including Dryer Vent Cleaning in Taylor and nearby Hutto, Round Rock, Pflugerville, and Windemere. If you’re just outside Taylor in any of these communities, we’ll schedule a visit just as quickly as we would for a home on Main Street. Call (855) 507-9184 and we’ll get you on the calendar.
Serving Taylor, TX — Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Taylor
No, an attic-terminating dryer vent is not safe and was never code-compliant, even when your home was built. Lint and moisture accumulate in enclosed spaces, creating a fire hazard and promoting wood rot. The fix is routing a new vent to an exterior wall or roof, which we do regularly in Taylor’s older homes. Call (855) 507-9184 for an assessment.
Most Taylor households should clean their dryer vent every 12 months, though homes with longer vent runs or several occupants may need service every 6 to 9 months. Taylor’s cedar season adds fine debris that finds its way into vent caps and shortens the interval for some homes. A quick visual check of your exterior cap each spring will tell you if you need us sooner.
Yes, we work throughout the historic north side, including homes along North Main Street and the surrounding blocks. We know these houses often have unusual vent paths, tight crawlspaces, and original construction that requires careful access. Our team has the equipment and experience to clean and repair vents in Taylor’s older homes without damaging original features. Call (855) 507-9184 to schedule.
Clothes taking more than one cycle to dry is the most reliable sign, followed by a burning smell while the dryer runs, the dryer exterior feeling unusually hot, or visible lint around the exterior vent cap. If you notice any of these in your Taylor home, stop using the dryer until the vent is inspected. A clogged vent is the leading cause of dryer fires, and the fix costs far less than the risk. Call (855) 507-9184 and we’ll get it checked.
Yes, we install new dryer vents in Taylor’s mid-century ranch homes, which often have short but poorly routed vent runs. If your current vent uses flexible foil or has a long horizontal run, we’ll assess whether a rigid duct upgrade or a rerouted path would improve airflow and safety. Installations include a new exterior cap and a post-installation airflow test. Call (855) 507-9184 for a free estimate.
Contact Ashton Chimney for Dryer Vent Cleaning in Taylor
If your dryer is running long, running hot, or you suspect your vent isn’t doing its job, call us at (855) 507-9184. We’ll answer your questions in plain language, schedule a visit that respects your time, and leave you with a vent that moves air the way it should. One call covers the inspection, the cleaning, and any repairs if needed, all handled by the same team.
Written by Nolan Pruett, Owner at Ashton Chimney, serving Taylor and Williamson County.