Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Cedar Park?
Chimney repair in Cedar Park typically runs $250 to $1,800, with most common fixes landing between $350 and $750. A straightforward crown repair or chase cover replacement sits at the low end, while a full stainless liner installation climbs toward $3,500 to $6,000 depending on length and appliance type. The number you’ll actually pay comes down to what’s failing, how far the damage has spread, and whether the flue can be resurfaced rather than rebuilt.
We’re Ashton Chimney, and we handle the sweep, the Chimney Repair, and the sign-off under one roof. That matters for pricing: when the same company inspects the chimney and does the work, you’re not paying two contractors to drive to Cedar Park and look at the same flue. Below is what repairs actually cost here in 2026, what pushes those numbers up, and how to avoid overpaying.
Key Takeaways
- Most Cedar Park chimney repairs fall between $350 and $750.
- A HeatShield flue resurfacing often costs thousands less than a full liner replacement.
- Masonry cracks around here tend to come from our clay soil movement and summer heat, not just age.
- Free estimates and upfront pricing mean you know the number before anyone touches the chimney.
- Repairs use professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, never hardware-store substitutes.
Chimney Repair Cost Breakdown (2026)
These are real ranges for the Cedar Park market, not national averages pulled from a widget. Line-item pricing gives you a way to compare any bid you get, ours included. Every repair we quote comes with a free estimate and upfront pricing, so the number on the invoice matches the number you were given.
| Repair | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney sweep & inspection | $150 – $300 | Cleaning the flue, checking the firebox, damper, crown, and cap. Done before any repair so we know what we’re dealing with. |
| Crown repair (minor) | $250 – $450 | Sealing hairline cracks in the concrete crown so water stops getting behind the masonry. |
| Crown rebuild | $450 – $850 | Removing a failed crown and pouring a new one with proper overhang and bond break. |
| Chase cover replacement | $350 – $700 | New stainless or copper chase cover over a prefab chimney, replacing a rusted-out original. |
| Chimney cap & spark arrestor | $150 – $400 | New cap with mesh to keep rain, birds, and squirrels out of the flue. |
| HeatShield flue resurfacing | $1,200 – $2,800 | Restoring a cracked or pitted clay liner from the inside with a HeatShield-certified repair, avoiding a full reline. |
| DuraFlex stainless liner reline | $2,800 – $6,000 | New flexible stainless liner rated for wood, gas, or oil, sized to the appliance. Cost depends on height and appliance. |
| Tuckpointing / masonry repair | $400 – $1,500 | Repointing mortar joints in the firebox or exterior stack where they’ve crumbled. |
| Firebox rebuild | $900 – $2,500 | Rebuilding the firebox floor or walls when the brick has cracked from repeated heat cycles. |
| Dryer vent cleaning | $125 – $250 | Cleaning and clearing the dryer vent line, a separate fire risk from the fireplace but the same kind of neglect. |
What drives the number up or down? The biggest swing is liner work versus resurfacing. If your clay flue has cracks but the structure is sound, a HeatShield resurfacing can restore it to a code-compliant state for a fraction of a reline. If the liner is collapsed, badly offset, or the wrong size for your appliance, a DuraFlex stainless liner is the right fix and the price reflects that. Chimney height matters too. A two-story stack in a Cedar Park neighborhood like Ranch at Brushy Creek or Forest Oaks runs more in material and labor than a single-story stack closer to the old downtown blocks. Access is the other factor. A chimney tucked against a roofline with steep pitch takes longer to work on safely than one with clear access.
What Affects Chimney Repair Pricing in Cedar Park
Local conditions push repair costs here in ways that don’t show up on a national pricing chart. A few that we see again and again:
- Clay soil movement. Cedar Park sits on expansive clay that swells when it’s wet and shrinks when it dries out. That cycle cracks masonry crowns and mortar joints over time. We see crown failures on houses that aren’t old, just because the ground under the chimney has shifted. It’s one of the most common repairs we quote in the area.
- Summer heat and freeze cycles. Central Texas gives masonry a workout. Long stretches of 100-degree days followed by the occasional hard freeze stress the concrete and mortar. A crown that lasted decades up north can fail much sooner here.
- Prefab versus masonry chimney. Most newer subdivisions around Cedar Park are prefab chimneys, and those repairs focus on chase covers, caps, and liner systems. Older masonry chimneys near downtown or along the established streets deal more with tuckpointing and firebox work. Different chimneys, different line items.
- Liner condition and appliance. A wood-burning fireplace, a gas insert, and a wood stove each need a liner matched to them. If your insert was dropped into a chimney built for wood without the right liner, correcting that is real work. We size DuraFlex liners to the appliance so the fix is rated for how you actually burn.
- Height and roof access. Tall stacks and steep roofs add labor. It’s not markup; it’s the time and safety equipment it takes to do the job right.
- How long the damage went unnoticed. Water is patient. A small crown crack found early is a cheap fix. The same crack after two wet winters can mean rotted framing, damaged flashing, and a firebox that needs rebuilding. Inspecting early is the single best way to keep costs down.
We’ll tell you what we found, what it means, and what your options are, in plain language. If a HeatShield resurfacing will do the job, we won’t sell you a full reline. If a reline is the only code-compliant path, we’ll show you why. You can read more about our full Chimney Repair in Cedar Park services, or check our home page for the full scope of what we do.
How to Save on Chimney Repair
There’s no such thing as a cheap chimney repair done right, but there are smart ways to keep the number down without cutting corners on materials.
- Catch it early. An annual sweep and inspection is the cheapest line item on this page, and it’s the one that prevents the expensive ones. Small crown cracks and worn mortar found in year one are hundreds of dollars; found in year five, they can be thousands.
- Ask about HeatShield before you agree to a reline. If a company quotes a full stainless liner without mentioning resurfacing, ask why. HeatShield-certified repair restores a damaged flue without defaulting straight to replacement, and it’s a documented, manufacturer-backed path. That alone can save well over a thousand dollars.
- Handle the related venting at the same time. If you’re having us out for the chimney, add the dryer vent cleaning to the same visit. It’s a separate system, but it’s the leading cause of dryer fires, and combining the two on one trip keeps both costs down.
- Don’t skip the cap. A missing or broken cap lets water, birds, and debris in. A new cap is one of the least expensive repairs here and one of the most protective.
- Get a free estimate with line-item pricing. Compare what’s being done, not just the total. Call (855) 507-9184 for a free estimate and we’ll walk you through it before any work starts. No hand-off to a separate contractor, no surprise add-ons.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Cedar Park?
Most chimney repairs in Cedar Park cost between $350 and $750, with the full range running from about $150 for a sweep and inspection up to $6,000 for a complete stainless liner install on a tall chimney. Call (855) 507-9184 for a free estimate tailored to your chimney.
Is it cheaper to repair my chimney liner or replace it?
Repair is usually cheaper when the clay liner is cracked but structurally sound: a HeatShield resurfacing typically runs $1,200 to $2,800 versus $2,800 to $6,000 for a full DuraFlex reline. If the liner is collapsed, badly offset, or the wrong size for your appliance, replacement is the only safe and code-compliant path. We’ll tell you which one you’re looking at, honestly.
How much does a chimney sweep and inspection cost in Cedar Park?
A chimney sweep and inspection runs $150 to $300 here, and it’s the smart first step before any repair. The inspection tells us whether you’re looking at a crown crack, a liner problem, or something in the firebox, so the repair quote is based on the actual condition rather than a guess.
Can chimney repair be done the same day?
Many smaller repairs, like crowns, caps, and chase covers, can often be completed on the same visit as the inspection, though timing depends on what we find and the weather. Call (855) 507-9184 and we’ll give you a realistic timeline up front rather than a promise we can’t keep.
Do I need a chimney repair if I only use a gas insert?
Yes. A gas insert produces its own venting demands, and if it was installed into a chimney without a liner rated for gas, that’s a real problem regardless of how little you notice it. A proper DuraFlex liner rated for the appliance is often the fix, and we’ll confirm what’s needed during the inspection. Call (855) 507-9184 to get it checked.
One more thing worth knowing: our dryer vent cleaning work is part of the same visit. A clogged dryer vent is a separate fire risk from the chimney, but it’s the same kind of neglect, and most chimney-only companies don’t touch it. We do, because your home’s venting systems all deserve a professional’s eye.
Pricing reflects the Cedar Park market as of 2026. Ashton Chimney offers free estimates – call (855) 507-9184.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Dustin Whitaker"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Cole Doyle"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Tyrone Ingram