Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Cedar Park?
Chimney liner and rebuild work in Cedar Park runs about $2,400 to $3,400 for a standard stainless steel liner on a single-story home, and $6,000 to $18,000 for a partial or full chimney rebuild where the masonry has failed. A HeatShield flue resurfacing – the repair path we use when the flue is still structurally sound – usually lands between $1,100 and $2,800. Most single-story Cedar Park homes fall on the lower end because the run is short and the roof pitch is forgiving.
Those numbers are the real 2026 market here, not a national average borrowed from a website that’s never set foot in Williamson County. What you actually pay depends on the flue’s condition, the appliance it serves, and whether the chimney needs structural repair above the roofline. Below is the full breakdown, what moves the price, and how to spot a quote that’s padded.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items shake out for Cedar Park homeowners. Every figure is a job range, materials and labor included.
| Line Item | Typical Cost Range |
|---|---|
| Chimney inspection (Level 1 or 2, with camera) | $150 – $450 |
| Stainless steel liner, single-story, wood-burning | $2,400 – $3,400 |
| Stainless steel liner, two-story or long run | $3,200 – $5,200 |
| DuraFlex flexible liner, gas or oil appliance | $1,800 – $3,000 |
| HeatShield flue resurfacing (repair, not replacement) | $1,100 – $2,800 |
| Insulation wrap for the liner (required on exterior chimneys) | $300 – $800 |
| New top plate, cap, and crown | $400 – $1,200 |
| Partial rebuild (crown, top courses, flashing) | $6,000 – $9,000 |
| Full chimney rebuild above the roofline | $10,000 – $18,000+ |
| Wood stove or insert connection rework | $500 – $1,500 |
So a typical reline job on a Cedar Park home – inspection, liner, insulation, cap, and crown – lands around $3,500 to $4,800 all in. A rebuild is a separate animal: once you’re replacing masonry above the roofline, the price is driven by height, access, and how much of the original structure can be saved.
The single biggest swing factor is whether you need a liner at all. Plenty of chimneys that get quoted a full reline can actually be restored with HeatShield, which is why we inspect first. Jumping straight to replacement when a resurfacing will do is the most common way homeowners overpay on this work.
What Affects Chimney Liner & Rebuild Pricing in Cedar Park
- How many flues and what appliance they serve. A gas insert needs a smaller, less expensive liner than a wood-burning fireplace. A home running a wood stove plus a furnace flue is priced per flue, not as one job.
- Roof height and pitch. Single-story homes around the Buttercup Creek and Cypress Creek neighborhoods are straightforward. Two-story homes in the Ranch at Brushy Creek and Twin Creeks areas mean more liner length and more setup time, which shows up directly in the labor line.
- Whether the flue is offset or straight. A chimney with a jog in it needs a flexible liner and more careful routing. Straight flues are faster and cheaper. This is one of the first things we check with a camera.
- Clay tile condition. Original clay-tile flues in older Cedar Park homes are often cracked or spalling after years of heat cycling. That’s where HeatShield earns its place – it bonds a refractory coating to the existing flue, restoring it to a code-compliant surface without tearing out the tiles.
- Material choice. We specify professional-trade brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because the liner is a permanent, hidden component. Hardware-store substitutes cost less up front and don’t hold up to a wood-burning appliance’s heat over a decade.
- Exterior vs. interior chimney. Exterior chimneys on the outside of the house run colder, so code calls for an insulated liner to prevent creosote buildup and drafting problems. That adds $300 to $800 but isn’t optional if you want a safe, working system.
- Permits and code. A liner or rebuild that changes the flue’s structure may require a permit through the City of Cedar Park. We account for that in the quote so there are no surprises mid-job.
Local climate matters more than people expect. Central Texas swings from humid summers to occasional hard freezes, and that freeze-thaw cycle is hard on masonry crowns and flashing. We see crown cracking and water intrusion on Cedar Park chimneys regularly – water gets in, freezes, and quietly turns a $900 crown repair into a $12,000 rebuild if it’s left long enough. Catching it early is the whole game.
If you want the deeper technical picture on how we approach liners versus rebuilds, our Chimney Liner & Rebuild in Cedar Park page walks through the methods. Start at our home page if you’re new to us and want the overview.
How to Save on Chimney Liner & Rebuild
You can’t make chimney work cheap without cutting corners that cost more later, but you can avoid overpaying. Here’s where the real savings live.
- Get an inspection before any quote. A camera inspection tells you whether you need a resurfacing or a full reline. Skipping it and accepting a phone quote is how people end up paying for a replacement they didn’t need. The $150 to $450 inspection routinely saves thousands.
- Ask specifically whether HeatShield is an option. If your flue is damaged but not failing structurally, resurfacing runs $1,100 to $2,800 versus $2,400 to $5,200 for a new liner. We’ll tell you plainly which one your chimney actually needs.
- Bundle the repair into one visit. When the sweep, the liner, and the cap and crown are handled by the same company, you’re not paying a second crew to show up or a second inspection fee. One company handles the sweep, the repair, and the sign-off.
- Fix small things now. A $600 crown repair prevents a rebuild. Water intrusion is the leading driver of expensive chimney masonry work in Cedar Park, and it’s almost always cheaper to stop early than to rebuild.
- Book before the fall rush. Chimney demand spikes as Cedar Park homeowners start thinking about fireplaces in late October. Scheduling liner work in spring or summer gets you more flexible scheduling and better attention on the materials.
We give free estimates, and we’ll tell you what we found, what it means, and what your options are – in plain language, with the price of each path in front of you before you commit.
FAQs – Chimney Liner & Rebuild Cost
Is it cheaper to repair or replace a chimney liner in Cedar Park?
Repair is usually cheaper when it’s an option – HeatShield flue resurfacing runs $1,100 to $2,800 versus $2,400 to $5,200 for a full reline. Repair works when the flue is damaged but still structurally sound; if the tiles are crumbling or the flue has shifted, a new DuraFlex liner is the right call. Call us for an inspection and an honest answer on which one your chimney actually needs.
How much does a chimney rebuild cost in Cedar Park?
A partial rebuild runs $6,000 to $9,000 and a full rebuild above the roofline runs $10,000 to $18,000 or more. The final number comes down to chimney height, how much masonry can be saved, and access. We scope it in person before quoting so you’re not working from a guess – estimates are free.
Can you reline a chimney for a gas fireplace or insert?
Yes – a gas appliance usually needs a smaller diameter DuraFlex liner, and the job typically costs $1,800 to $3,000. Gas liners are sized to the appliance and vented correctly, which matters for both safety and efficiency. Call us with your appliance details and we’ll give you a range.
How long does chimney liner installation take?
A standard liner install is a one- to two-day job for a single-story Cedar Park home, and a rebuild runs three to seven days depending on scope and weather. Most liner work is done in one visit once materials are on site. We’ll give you a clear timeline before we start.
Do I need a permit for a chimney liner or rebuild in Cedar Park?
Liner work often doesn’t require a permit, but a rebuild or a structural change to the flue can. We confirm the requirement with the City of Cedar Park before the job starts and handle that part so it doesn’t trip you up at resale. Call us and we’ll walk through what your specific project needs.
Contact Ashton Chimney
If your flue needs attention, don’t wait on a phone quote that skips the inspection. We’ll look at the actual chimney, tell you whether resurfacing or a new liner is the honest answer, and hand you a clear price for each path. Ashton Chimney works with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – professional-grade materials, not off-the-shelf substitutes – and one company handles the sweep, the repair, and the sign-off. Call (855) 507-9184 for a free estimate in Cedar Park.
Pricing reflects the Cedar Park market as of 2026. Ashton Chimney offers free estimates – call (855) 507-9184.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Alicia Hampton"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Nisha Patel"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Dustin Whitaker