Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Dryer Vent Cleaning for Cedar Park Homeowners
Dryer vent cleaning in Cedar Park typically costs $129 – $249 for a standard single-story home, and most cleanings are completed in under 90 minutes. If your dryer has been taking longer than one cycle to dry a normal load, or if the outside vent flap isn’t opening when the dryer runs, you likely have a restricted vent that needs attention now. At Ashton Chimney, we handle dryer vent cleaning the same way we handle chimney work: with professional tools, a clear explanation of what we found, and no upsell pressure. Call (855) 507-9184 for a free estimate and honest assessment of whether cleaning is enough or if your vent needs a more involved repair.
Nolan Pruett leads our Dryer Vent Cleaning in Cedar Park, and the standard we hold our dryer vent service to matches what we do on masonry chimneys and stainless flue systems: the system gets inspected, not just swept. We’re not a duct-cleaning franchise running a brush through a pipe and handing you a bill. We look at the entire vent run from dryer to termination point, check for separations, clogs, and rodent damage, and we show you what we see.
Most Cedar Park homes built in the last twenty years have dryer vents that run through walls or into the attic before exiting the roof, and those longer runs trap lint faster than homeowners expect. The U.S. Fire Administration attributes roughly 2,900 dryer fires each year, with lint buildup as the leading cause. That’s not a scare statistic, it’s the reason this service exists alongside our chimney sweeping: both are fire-prevention maintenance for venting systems in your house.
What Our Dryer Vent Cleaning Service Includes
Full Vent Run Cleaning
The core job is removing compacted lint from the entire vent pipe, not just the first few feet behind the dryer. We use a rotary brush system paired with a professional-grade vacuum that captures debris at the termination point rather than blowing it into the house. Most Cedar Park dryer vents are between 6 and 25 feet long, and lint cakes up at bends, horizontal runs, and the exit cap, which is exactly where we focus the brush work.
When lint accumulates past roughly a quarter-inch of buildup on the pipe walls, airflow drops enough to push dryer cycle times up significantly. Ashton Chimney cleans until the pipe surfaces are clear, then verifies the airflow at the outside vent with a simple volume test. We don’t leave until the vent is measurably moving air the way it should.
Dryer Lint Trap and Interior Housing Cleaning
Your dryer’s removable lint screen catches maybe 25% of the lint the machine produces. The rest travels into the interior housing, around the blower wheel, and into the vent path. We open the lint trap housing, vacuum out the cavity behind the screen, and clear the blower fan area when the machine’s access panel allows it.
This matters for two reasons. First, lint packed around the blower wheel shortens the motor’s life and raises the internal temperature, which wears out heating elements faster. Second, that trapped lint is already inside the machine and primed for ignition if the heating element runs hot. We service all major dryer brands, including LG, Samsung, Whirlpool, Maytag, and GE, and the tooling we carry handles both domestic and most import configurations.
Vent Configuration Inspection
Cedar Park building codes require dryer vents to terminate outside the structure with a damper cap that opens only while the dryer is running. We inspect the full run for code violations, including sagging spans, excessive bends, and the common shortcoming of flexible foil or plastic vent material that should have been replaced with rigid metal at installation. If we find a materials problem, we’ll point to it and tell you what rigid aluminum or galvanized replacement pipe costs.
The total vent length and number of elbows also matter. A 4-inch dryer vent should run no more than 35 feet with each elbow accounting for roughly 5 feet of effective length. About one in five Cedar Park homes we inspect has a vent that exceeds that limit, usually because the laundry room isn’t on an exterior wall. When that’s the case, we’ll discuss vent routing options and whether a booster fan makes sense for your layout.
Venting from Gas Dryers
If your home runs on natural gas, your dryer exhaust carries combustion byproducts along with the lint, and a blocked vent means those gases, including carbon monoxide, can back up into the laundry room. Gas dryer vents deserve the same scrutiny as gas appliance flues, which is where Ashton Chimney’s chimney service background gives us an edge over dryer-vent-only companies. We check for proper termination clearance, seal integrity at the dryer connection, and any signs of heat or moisture damage around the vent.
We carry a combustion gas detector on every gas dryer job and test the area around the machine while the dryer runs. That’s not an upsell, it’s a standard safety check. If we find anything off, we’ll show you the reading and explain what it means in plain terms.
Dryer Vent Termination Cap and Roof/Wall Boot Cleaning
The outside cap is the most common location for a full or partial blockage in this area, because Cedar Park’s spring winds drive grass clippings, leaf debris, and sometimes nesting material into the opening. We remove the cap, clean the interior of the termination fitting, and clear any blockages from the duct run immediately behind it. The flapper mechanism gets checked to confirm it opens freely and seals when the dryer is off.
For vents that terminate through the roof (common in many Cedar Park two-story homes), we work from the roof with full fall-protection gear, or from a ladder if the termination is on a gable wall. Birds and wasps love roof vents, and we routinely find nests built inside caps that hadn’t been cleaned in years. After cleaning, we can install a pest-resistant cap if yours is missing or damaged.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Styles & brands we work with
Brands We Service for Dryer Vent Cleaning
We clean dryer vent systems across every major appliance brand, but we see a lot of Whirlpool, LG, Samsung, and Maytag units in Cedar Park homes, simply because those brands dominate the market here. Each machine has slightly different access points for the lint housing and blower wheel, and we carry the proper tooling to open each without forcing panels or stripping fasteners. A stripped access screw on an LG dryer we serviced means we caused a problem, and that doesn’t happen when the right tool comes out of the bag.
Gas dryers from brands like Speed Queen and Maytag also come through regularly, and we pay extra attention to the vent seal where the exhaust pipe meets the dryer body. A loose seal there leaks warm lint-laden air into your laundry room, and it’s a common hidden issue we fix on the spot with the right clamp or foil tape. Whether you own a Samsung, a Whirlpool, an old Kenmore, or any other make, the vent attached to it is what we’re there to clear, and the process is the same regardless of the decal on the front.
Signs You Need Dryer Vent Cleaning Right Now
- Clothes take two or more cycles to dry. A properly vented dryer should dry a normal cotton load in 40 to 50 minutes. When the vent is restricted, moist hot air lingers in the drum, and your dryer compensates by running longer. Every extra cycle costs you money in electricity or gas, and the added heat stresses the heating element.
- The dryer or laundry room gets unusually hot and humid. Exhaust air that should be moving outside is leaking into the room, usually at a loose connection or a cracked vent pipe. Humidity from that exhaust also promotes mold growth behind the machine, which can rot drywall and framing before you ever see it.
- The outside vent flap doesn’t open or shows lint fuzz. Walk outside while the dryer runs and check the termination cap. If the flapper isn’t opening under airflow, or if there’s a visible lint beard stuck around the opening, the vent has already reached the point where airflow is measurably constricted.
- You smell a burning or dusty odor while the dryer runs. Lint inside the machine housing or in the vent run can heat up and produce an acrid smell long before it ignites. That odor is a warning sign you should not ignore. Shut the dryer down, unplug it, and call us before running another load.
- Your last vent cleaning was more than a year ago, and you have pets. Pet hair travels through dryer exhaust in surprising volumes, and it binds with lint to form dense clogs faster than lint alone. Homes with two or more shedding dogs typically need vent service every six to nine months, even if the filter screen looks relatively clean.
Our Dryer Vent Cleaning Process – Step by Step
- 1
Visual assessment and system check. We start by pulling the dryer away from the wall and examining the full vent run from the connection point to the outside. With your permission, we’ll run the dryer briefly to feel the airflow at the termination point and check the exterior vent flap operation. This tells us the baseline condition before we touch anything.
- 2
Remove the vent pipe and clear it end to end. The vent pipe is disconnected at the dryer, and our rotary brush system travels the entire pipe run, breaking up compacted lint, hair, and debris. A professional-grade vacuum runs at the exit point simultaneously so loosened debris moves out of the pipe, not into your laundry room. We clean the pipe until the brush comes out with no visible residue.
- 3
Clean the lint trap housing and blower wheel. We remove the dryer’s lint trap screen and vacuum the cavity behind it with a narrow attachment that reaches into the housing. On most front-load machines, the lower access panel comes off and we clean the blower wheel and interior base plate. Lint packed around the blower wheel is one of the leading causes of bearing failure and motor burnout in newer dryers.
- 4
Inspect the full vent system for damage and code compliance. With the vent cleared, we check the pipe material, joints, terminations, and routing for damage, separation, sag, or rodent intrusion. Cedar Park and most of the Austin metro require rigid metal duct for new or replacement dryer vent installations, and we will tell you honestly if your existing setup doesn’t meet current standards and what the correction cost would be.
- 5
Reassemble, test, and report. The vent pipe is reconnected and sealed properly at the dryer, the machine is pushed back with the vent not kinked, and we run one final airflow test at the outside termination. We then walk you through what we found, what the airflow looks like now, and if anything needs follow-up attention. Our dryer vent cleanings leave you with a system that moves air and a clear picture of the vent’s condition.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Dryer Vent Cleaning Cost in Cedar Park?
Dryer vent cleaning in Cedar Park generally runs between $129 and $249 for a standard single-story home with a vent path under 15 feet. Two-story homes with roof terminations or longer vent runs typically run $179 to $289 because of the added roof access and more difficult brush routing. If your vent has never been cleaned and contains a severe blockage, or if nest removal is required, the cost can reach $350 or more, and we will give you that price before we do the work, not after.
The main factors that affect cost are vent length, termination location (wall versus roof), and the degree of blockage. A short wall vent on a one-story home is a quick, straightforward job. A 24-foot vent run through an attic and out a steep roof pitch takes more time and more care, and that is reflected in the quote. Homes that haven’t had vent cleaning in five years or more also tend to require extra passes with the brush to fully clear the pipe.
We don’t offer a cheap flat rate because cheap flat rates are how you get a brush shoved three feet into a pipe and called a cleaning. Our quote includes the full vent run, the lint trap housing, and the blower cavity, plus the final airflow verification. You’ll know the number before we start, and the estimate we give you over the phone is the number we stand behind unless we find something structural we couldn’t see from the outside. Call (855) 507-9184 and we’ll quote your specific home in about five minutes.
Dryer Vent Cleaning Near Cedar Park – Our Service Area
Ashton Chimney provides dryer vent cleaning across the north Austin metro, with Cedar Park at the center of our regular route. We routinely service homes in Anderson Mill, Brushy Creek, Jollyville, Leander, Jonestown, Round Rock, Hudson Bend, Wells Branch, Lago Vista, Windemere, and Georgetown. Most of these areas can be scheduled within a few business days of the first call, and we’ll work around your availability rather than trying to force a tight window. Our home service page has the full overview of what we do across all three service lines, including chimney sweep and chimney repair for homes that need both venting systems serviced in one visit.
Serving Cedar Park, TX — Our Local Coverage Area
We’re based in the Cedar Park area and know this community well, and we also handle Dryer Vent Cleaning in Jollyville. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions – Dryer Vent Cleaning in Cedar Park
Dryer vent cleaning is the process of removing accumulated lint, pet hair, and debris from the entire exhaust duct that runs from your dryer to the outside of your home. It includes cleaning the pipe interior with a rotary brush and vacuum, clearing the lint trap housing inside the dryer, and checking the external vent termination to confirm airflow is unobstructed. A proper cleaning restores the dryer to efficient operation and removes the leading fuel source for dryer fires.
Most dryer vent cleanings in Cedar Park take between 45 and 90 minutes from arrival to final test. Shorter wall vents on single-story homes are typically done in under an hour. Longer roof-terminated runs or severely clogged systems can take up to two hours, and we’ll tell you at the time of booking what to expect for your specific home.
Our standard dryer vent cleaning in Cedar Park ranges from $129 to $289 depending on vent length, access difficulty, and blockage level. We give you a firm price over the phone before we come out, and that price doesn’t change unless we find structural damage that couldn’t be seen ahead of time. Call (855) 507-9184 for a free estimate, and we’ll walk through the specifics of your vent setup.
We service all major dryer brands including Whirlpool, LG, Samsung, Maytag, GE, Kenmore, and Speed Queen, for both gas and electric models. The venting system is the same regardless of who made the machine, and the tooling we carry covers all standard lint housing and blower wheel configurations. What matters more than the brand is the vent run itself, which is where the lint problem lives.
If you smell burning or see smoke coming from the dryer, shut the machine down, unplug it, and call us. We prioritize urgent calls for conditions that could indicate an active fire risk or a fully blocked vent, and we’ll get to your Cedar Park home as quickly as the schedule allows. For non-urgent service, we typically schedule within a few business days of the first call.
We stand behind the quality of our work, and if we miss something during a standard cleaning that should have been caught, we’ll return and correct it at no charge. Our inspection and cleaning process is thorough enough that this rarely happens, and we show you the vent condition before and after so you know the work was done. We don’t offer a blanket warranty on future lint accumulation, because how fast the vent re-clogs depends on your dryer usage, laundry volume, and pets.
Clear a few feet of space in front of and around the dryer so we have room to work, and remove any items stored on top of the machine. If the dryer is stacked in a laundry closet, clear the path to the closet door so we can pull the unit out safely. It also helps if you can tell us roughly how old the dryer is and whether you’ve ever had the vent cleaned before, but neither is required for us to do the job.
Schedule Your Dryer Vent Cleaning Service in Cedar Park Today
A clogged dryer vent is one of the easiest fire risks in your home to eliminate, and the service takes less time than a trip to the grocery store. Call Ashton Chimney at (855) 507-9184 for a free, no-obligation estimate on dryer vent cleaning in Cedar Park, and we’ll get you on the schedule. If you also need a chimney sweep or liner inspection, Nolan Pruett and our team can handle both on the same visit, so one call covers every venting system in your home.
Written by Nolan Pruett, Owner at Ashton Chimney, serving Cedar Park, TX and the surrounding north Austin communities.