Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Cedar Park Homeowners
A chimney sweep in Cedar Park usually runs between $180 and $340 for a standard cleaning and inspection, and most homes in this part of Williamson County need it done once a year if the fireplace gets regular use. The job takes about 45 to 90 minutes and includes a full visual check of the flue, firebox, damper, and cap. Call (855) 507-9184 to schedule with Ashton Chimney, led by Nolan Pruett, and you’ll get a straight answer on what your fireplace actually needs and what it doesn’t.
We work all across Cedar Park and the neighboring communities, from the older ranch-style homes near Buttercup Creek to the newer construction up by Ronald Reagan Boulevard, and we also provide Chimney Sweep in Jollyville for nearby residents. What we see most often in this area: creosote buildup from oak and mesquite fires, critter nests packed into uncapped flues, and rain-damaged mortar joints from the spring storm season. None of these are reasons to panic. They’re reasons to get the chimney cleaned and inspected by someone who treats it as a system, not just a tube that needs brushing.
Key Takeaways
- Standard chimney sweep in Cedar Park ranges from $180 to $340, depending on flue condition and accessibility.
- Annual cleaning is recommended for wood-burning fireplaces; gas units can go longer but still need periodic inspection.
- Ashton Chimney handles sweep, repair, and dryer vent cleaning under one roof with professional-grade materials from DuraFlex, HeatShield, and Copperfield.
- Skipping a sweep risks creosote ignition, which burns hot and can crack flue liners before you ever see flames in the living room.
- Free estimates by phone at (855) 507-9184, and you’ll always see the camera footage before any repair is recommended.
Styles & brands we work with
Chimney Sweep Services
Chimney Sweep in Cedar Park covers the full cleaning and inspection of your fireplace or stove venting system, from the firebox up through the flue to the termination cap. Most Cedar Park homes need this every 12 months for wood-burning fireplaces, or every 2 to 3 years for gas log sets that see light use. Our sweep includes a top-down flue brushing, firebox cleanup, damper check, and a documented visual inspection using a camera so you can see exactly what we see.
Standard Sweep
A standard sweep at Ashton Chimney removes creosote, soot, and any bird or rodent nesting material from the flue and smoke chamber. We also check the chimney cap, crown, and flashing from the roof side and report on any deterioration before it becomes a leak. Expect 45 to 90 minutes, and expect us to leave the hearth cleaner than we found it.
Inspection-Only Visits
If you’ve closed on a home or haven’t used the fireplace in years, a visual or camera inspection without a full sweep might be the right first step. We’ll run a camera up the flue, check for cracked tile liners, rusted dampers, or gaps in the mortar, and tell you plainly whether the chimney is safe to use. Some real estate transactions in Cedar Park require this before closing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cleaning
Chimney Cleaning is the physical removal of creosote, soot, and blockages from the inside of your flue, and it’s the single most effective thing you can do to prevent a chimney fire in a Cedar Park home. The need for it depends on burn frequency and wood type: homes burning oak or mesquite twice a week through winter will build up deposits faster than a fireplace used only on holidays. Our cleaning uses professional rotary brushes sized to your flue, not the hardware-store rods, and we back it with a camera check afterward.
Creosote Removal
Creosote builds up in layers, and once it becomes a shiny, tar-like glaze, a basic brush won’t cut it. We use mechanical and chemical treatments matched to the stage of buildup, and we’ll show you the before-and-after footage so you know what actually came off the flue walls. This is the difference between a wipe-down and a clean flue.
Flue Blockage Removal
Squirrels, raccoons, and chimney swifts love the unused flue of a Cedar Park home in spring. We’ve pulled out everything from leaves and twigs to a full squirrel nest that had been there so long the damper wouldn’t fully open. Once it’s out, we’ll check whether a new cap or screen is needed to keep it from happening again.
Fireplace Cleaning
Fireplace Cleaning goes beyond the flue to address the firebox, grate, andirons, glass doors, and the brick or stone surround that gets coated in ash and soot. It matters because a dirty firebox doesn’t just look bad; accumulated ash absorbs moisture and can accelerate brick spalling, especially in the humidity swings we get here in Williamson County. Our crew cleans the firebox as part of a full sweep, and we also offer deeper cleaning for heavy glass-door carbon deposits and stained hearth stone.
Firebox Soot and Ash Removal
We remove loose ash, vacuum the firebox floor and walls, and brush down the smoke shelf and damper area. If there’s old creosote staining on the brick, we can treat it during the same visit. A clean firebox lets you spot cracks or loose mortar early, before they become structural issues.
Glass Door and Insert Cleaning
Gas and wood inserts with glass fronts build up a white or brown film that a standard glass cleaner won’t touch. We use non-scratching cleaners and techniques specific to ceramic glass, which is the only material used on modern fireplace doors. We’ll also check the gasket seal while we’re at it, since a worn gasket lets air in and efficiency out.
Chimney Services
Chimney Services at Ashton Chimney means the full scope of what we do, as outlined in our Chimney Sweep Maintenance Checklist for Cedar Park Homeowners: sweeping, cleaning, inspection, and repair of flues, liners, caps, dampers, and crowns. The point of bundling this under one company is accountability: if the sweep turns up a cracked flue tile or a rusted-out damper, the same crew that found it can quote the fix and do the repair without handing you off to a subcontractor. In Cedar Park, where freeze-thaw cycles chip away at brick and crown mortar every winter, that matters.
Sweep and Repair Combo
Most of our work in Cedar Park starts as a sweep and becomes a small repair once we get eyes on the flue. That might mean a new cap, a damper replacement, or a ChimneySaver water repellent application. We’ll quote the repair separately and show you the camera footage that justifies it, and you decide what to do.
Liner and Water Intrusion Work
If the flue liner is cracked or missing sections, a HeatShield resurfacing or a DuraFlex stainless reline are on the table, and we’ll explain the difference in plain language. Water leaks from cracked crowns or failed flashing are another common call in this area. We’ll diagnose the source, quote the fix, and use materials rated for the application, not whatever’s on the shelf at the big box store.
Chimney Sweep Certified
Chimney Sweep Certified work means the technician on your roof has been trained and tested on flue mechanics, fire codes, and inspection standards, not just handed a brush and told to go, as detailed in our Chimney Sweep Troubleshooting: Common Problems and How to Fix Them. At Ashton Chimney, Nolan Pruett leads every job with the expectation that our work meets the standards a certified sweep would follow: full visual and camera documentation, honest reporting, and a clean worksite. We don’t have a stack of framed certificates to show you; we have photos of flues we’ve restored and customers who call us back every year.
What Certification Means in Practice
It means we don’t cut corners on the things you can’t see: drop cloths, vacuum containment, roof-safe ladder setup, and flue measurements before we ever put a brush in. It also means we know the difference between a cosmetic crack and a structural hazard, and we’ll tell you which one you have. A sweep that takes 30 minutes from door to departure is not doing all of this.
Why It Matters for Insurance
Some homeowner’s policies in Texas ask whether the chimney has been inspected and cleaned by a qualified professional, especially after a claim or a change in policy. Our documentation includes the date, the scope of work, and the camera findings. If your insurer needs proof of maintenance, we can provide it.
Gas Fireplace Cleaning
Gas Fireplace Cleaning is not the same as a wood-burning sweep, and honestly, a lot of Cedar Park homeowners assume their gas unit doesn’t need anything because there’s no creosote. That’s half true. Gas logs don’t make creosote, but they do produce sulfur-based deposits that can corrode burners, cloud glass, and indicate venting problems if the flame burns yellow instead of blue. We clean gas log sets, vacuum the burner pan, inspect the thermocouple and igniter, and check the log placement against the manufacturer’s spec.
Burner and Log Set Service
We remove the logs, clean the burners with compressed air and a soft brush, and check for spider nests in the venturi tubes, which are startlingly common in Texas. A clogged burner on a gas fireplace causes sooting and can push carbon monoxide into the room. Once the burner is clear and the logs are re-set correctly, the flame pattern will tell you everything you need to know.
Venting and Glass Seal Check
Direct-vent gas fireplaces push exhaust through a coaxial pipe, and if that pipe is leaking or blocked, the combustion byproducts don’t go where they’re supposed to. We’ll check the termination cap outside, the gasket around the glass, and the venting connections we can access without tearing into drywall. It’s a 15-minute check that catches most carbon monoxide problems before a detector ever goes off in the middle of the night.
Chimney Maintenance
Chimney Maintenance is the scheduled care that keeps the whole system functioning between major repairs: annual sweeps, cap and screen replacement, crown sealing, damper lubrication, and water repellent application. The goal is to catch the $400 fix before it becomes a $4,000 reline. Homes in Cedar Park’s limestone-heavy soil don’t deal with the same frost heave as northern states, but the heat of Texas summers and the occasional hard freeze still put real stress on mortar and flashing.
Annual Sweep and Inspection
Once a year for wood burners, and every two to three years for gas units, is the maintenance rhythm we recommend. The sweep itself is part of it, but the inspection is where the real preventive value lives. We’ll track changes in your flue year over year, so a flue tile that starts to hairline crack gets monitored before it becomes a full liner replacement.
Water Management
Water is the slow killer of chimneys in Central Texas. A cracked crown or failed flashing lets rain seep into the brick, and every freeze cycle works the crack wider. We apply ChimneySaver water repellent and seal crowns with materials meant for outdoor masonry, and we’ll tell you honestly if your crown has years left or needs a pour. This is maintenance, not upsell.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service fireplaces, inserts, and venting components across all major brands, but there are a few we see especially often in Cedar Park homes. Copperfield chimneys and caps are common in this area, and we stock replacement caps and know their termination assemblies inside and out. When a Copperfield cap gets blown off by a spring storm or rusted through after years of exposure, we can source the correct replacement without improvising.
DuraFlex stainless liners are our default recommendation when a clay tile liner has cracked past the point of repair. We’ve installed and serviced DuraFlex systems in wood, gas, and oil applications across Cedar Park and the surrounding county. HeatShield is the other half of the liner story: when the flue is intact enough to save, we use HeatShield’s cerfractory resurfacing system to restore the existing liner rather than replacing it, which saves money and preserves the chimney’s original footprint. Gelco caps and shrouds round out the common brands we service. Whether you have one of these or any other make, we can help, and we’ll name the parts going into your home.
Signs You Need a Pro Right Now
- Smoke rolling back into the room when the fire is lit. This means the flue isn’t drawing properly, and the cause could be a blockage, a damper that’s not fully open, or a flue that’s too cold. It’s not something to tolerate or “just crack a window” around; poor draft pulls carbon monoxide back into the living space.
- A strong, sharp smell like a campfire, but you haven’t burned anything in weeks. That’s creosote off-gassing in humidity, and it usually means the flue has a heavy buildup that needs removal before another fire. In Cedar Park’s humid springs, this smell gets worse, not better.
- Flakes of black, shiny material falling into the firebox. That’s glazed creosote shedding off the flue walls. Glazed creosote is dense, burns at over 2,000 degrees when it ignites, and is nearly impossible to brush out without chemical treatment or mechanical removal.
- Water staining on the ceiling or walls near the chimney chase. The leak may be in the flashing, the crown, or the chase top, but every day it continues, the damage gets more expensive to fix. We’ve seen this in older Cedar Park homes where the flashing was never properly replaced after a roof job.
- Rust on the damper or firebox floor. Rust means water is getting in somewhere, and a rusted damper either won’t open or won’t close all the way. Both conditions waste energy and create draft problems, and the water that caused the rust is still doing damage behind the walls.
Our Process, Step by Step
- 1
Arrival and floor protection. We lay drop cloths from the front door to the fireplace, cover the hearth area, and set up our vacuums before anything else. A proper sweep leaves no soot in the house, and that starts with how we set up.
- 2
Flue assessment and measurement. We measure the flue dimensions, check the damper, and run a camera up the flue before we ever put a brush in. This gives us a baseline of the liner condition and lets us match the right brush size and shape to your chimney.
- 3
Top-down brushing and debris removal. From the roof, we run the appropriate brush down the full length of the flue, followed by a smoke-chamber cleanup. We also clear the smoke shelf, which is where creosote and nesting material collect out of sight.
- 4
Firebox and component cleaning. We clean the firebox, vacuum out all loosened debris, and clean the damper, glass doors, and log set or grate as applicable. Then we inspect the cap, crown, and flashing from the roof side.
- 5
Camera verification and report. We run the camera again after cleaning and walk you through the before-and-after footage. You’ll hear what we found, what it means, and what your options are, with a written summary and photos if requested. Nothing gets recommended without camera evidence you can see for yourself.
How Much Does Chimney Sweep Cost in Cedar Park?
A standard chimney sweep in Cedar Park typically runs $180 to $240 for a single-story home with an accessible roof and a flue in fair condition. Two-story homes, steep roof pitches, or flues with heavy glazed creosote can push that to $280 to $340. Gas fireplace cleaning and inspection usually lands in the $130 to $200 range depending on the unit.
What affects the price: roof pitch and height, the degree of creosote buildup, whether a cap or screen needs replacing, and whether any blockages require extra time to remove. Homes in the Buttercup Creek area with steep gables will sometimes cost more than a single-story ranch near Cypress Creek Road. What doesn’t affect the price: whether you buy anything else from us. We don’t use a low sweep price as bait and then load the invoice with repairs.
To avoid overpaying, insist on a camera inspection as part of the sweep, and ask for the scope in writing before the work starts. Our estimates are free, and they include the sweep price, any recommended repairs with line-item costs, and the camera footage to back up every recommendation. Call (855) 507-9184 and we’ll give you a number before we ever set foot on the roof.
Our Service Area Near Cedar Park
We’re based in the Cedar Park area and work throughout Williamson and northern Travis counties, including Chimney Sweep in Anderson Mill and Chimney Sweep in Brushy Creek. Most calls in Jollyville, Leander, Jonestown, Round Rock, Hudson Bend, Wells Branch, Lago Vista, Windemere, and Georgetown can be scheduled within a few business days. If you’re just outside those areas, call and ask, and if you’re already on our home page, you’ll see the same service area mapped out. We’ll be straight about whether we can reach you.
Serving Cedar Park, TX — Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Cedar Park
A chimney sweep is the cleaning of the flue, smoke chamber, damper, and firebox using brushes and vacuums to remove creosote, soot, and blockages. It also includes a visual inspection of the liner, cap, crown, and flashing to check for damage. The point is to keep the chimney safe and drawing properly while catching small problems before they become structural ones.
Most sweeps take between 45 and 90 minutes from setup to final cleanup. A heavily coated flue, a stubborn blockage, or a difficult roof access can extend the visit by another 30 to 60 minutes. We’ll give you a time range when you book, and we’ll call if anything changes.
Expect $180 to $340 depending on roof height, buildup, and any minor replacements like a cap or screen. Gas fireplace cleaning runs lower, typically $130 to $200. Your estimate is free, and we’ll put the price in writing before we start. Call (855) 507-9184 to get an exact number for your setup.
We service all major brands, and we work with the professional-grade materials we’d want in our own homes: DuraFlex stainless liners, HeatShield resurfacing, Copperfield caps, and Gelco shrouds. Whether you have a common builder-grade unit or a premium insert, we’ll inspect it and quote the work without trying to talk you into a new unit you don’t need.
If you have an active chimney fire, call 911 first. Once the fire department has cleared the scene, we can inspect the flue for damage and quote any repairs before you burn again. For non-emergency service during peak fall season, we schedule on a first-call basis and will give you an honest window when you book.
Our repair and reline work is covered by the manufacturer’s materials warranty, and our labor is backed by our commitment to make it right if something fails due to our workmanship. We’ll show you the warranty documentation before any major repair starts, so you know exactly what’s covered and for how long. Sweeps themselves are a maintenance service, not a warrantied product.
Clear the area within about five feet of the fireplace: move rugs, decor, and anything fragile. Stop burning at least 24 hours before the appointment so the firebox is cool. If you have pets, keep them in another room while we’re working, and make sure we can access the area around the chimney from outside, including any gates.
Schedule Your Chimney Sweep Service in Cedar Park Today
If your fireplace has gone a year or more without a sweep, or you’ve never had the chimney inspected since you bought the home, now is the right time to book. Call (855) 507-9184 and we’ll schedule your sweep, give you a free estimate, and walk you through exactly what we’ll do. No pressure, no scare tactics, no repair recommendations without camera footage you can see yourself.
Written by Nolan Pruett, Owner at Ashton Chimney, serving Cedar Park and surrounding communities.