Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Garfield, TX | Ashton Chimney
We provide independent DuraFlex chimney cleaning, inspection, and repair across Garfield, TX (78617), and also offer DuraFlex repair in Hornsby Bend. What makes our DuraFlex work different here: Garfield sits along the Colorado River corridor and FM 973, where uncapped flues get claimed by raccoons and chimney swifts at a rate you simply don’t see in town. We know these systems well enough to spot the wildlife damage, the twist-lock corrosion, and the crown cracks before they turn into a chimney fire or a smoke-filled living room. Call (855) 507-9184 for a free estimate.
Why Garfield Residents Choose Us for DuraFlex Service
We’ve rebuilt and relined dozens of DuraFlex factory-built systems across far east Travis County. That hands-on time means we know the twist-lock joints, the cap designs, and where these chimneys fail under rural heat-cycle use. We’re an independent DuraFlex sales & service specialist, not a manufacturer-authorized shop, so our recommendations come from what we’ve actually seen inside Garfield flues, not a corporate script. Nolan Pruett, our owner, came up through the Building Trades program at ACC’s Round Rock Campus and has been working fireplaces and flues across the Austin metro for the better part of fifteen years. He’s not interested in selling you a liner you don’t need. Tell him what your fireplace is doing and he’ll tell you exactly what’s going on in that flue. We’re local, we know Garfield’s housing stock, and we stock genuine DuraFlex caps and common replacement parts so turnaround doesn’t drag on.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Garfield
- Corrosion and pitting at twist-lock joints – Garfield’s humid subtropical summers leave fireplaces idle for months. Creosote inside a 316L liner absorbs moisture, forms acidic condensate, and slowly eats at the joints. We see this on older DuraFlex liners more than any other failure mode out here, and it typically shows up during the first cold snap when the stove runs hot and the liner flexes.
- Wildlife nests packed into flues – Raccoons and chimney swifts love an uncapped DuraFlex flue on a wooded lot. We regularly pull nests from caps and flues on first-of-season calls in Garfield. Left alone, that nest blocks draft, smokes out the house, and becomes kindling above a live fire.
- Collapsed or missing cap screens on multi-flue caps – A raccoon doesn’t need much of an opening. When they force entry through a damaged screen on a DuraFlex multi-flue cap, the screen bends inward and the cap becomes a birdhouse. The fix is a new cap with stainless mesh, but only after we clear the flue and check for damage below.
- Cracked or spalling chimney crowns after freeze-thaw cycles – Central Texas ice storms don’t happen often, but when they do, water works into the crown of a DuraFlex factory-built unit, freezes, expands, and cracks it. Spring brings the spalling. By fall, you’ve got water in the chase and rust on the liner connection. We flag it on the Level 2.
- Degraded refractory panels and dampers in fireboxes – Years of high-heat wood burning on a rural lot takes a toll. Firebox refractory panels crack, dampers warp, and the whole system loses efficiency. When we clean a DuraFlex-equipped insert, we check the firebox too, because a clean liner doesn’t help if the combustion chamber is falling apart.
DuraFlex Service in Garfield: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic chimney page: because Garfield sits along the Colorado River corridor and FM 973, nearly every uncapped DuraFlex flue we open is claimed by chimney swifts, squirrels, or raccoons. The first cold night in November is when homeowners find out. They light a fire, the house fills with smoke, and they assume the liner failed. Half the time it’s just a nest packed above a missing cap screen. We pulled a raccoon nest from a DuraFlex-equipped wood stove on a wooded lot off FM 973 last October. The homeowner thought the stove was toast. We cleared the flue, swept the hardened creosote, installed a new multi-flue cap with stainless mesh, and ran a Level 2 inspection to verify the liner joints were sound. The stove drafted clean that same evening. That’s the Garfield pattern: wildlife first, mechanical failure second. The homes out here sit on acreage with mature trees, and the critters have nowhere else to go. Your DuraFlex chimney is the warmest, safest cavity for a mile.
DuraFlex Models & Products We Service in Garfield
We work on the full DuraFlex lineup homeowners in Garfield actually have: the 316L stainless flexible liner kits, the Pro 304 stainless liner systems, the Factory-Built (FB) chimney series with twist-lock sections, and the DuraTech all-fuel chimney system. When a replacement part is needed, we use genuine DuraFlex caps, dampers, and refractory panels where available. When the OEM part is backordered, we use quality aftermarket stainless liners and flashing that match DuraFlex dimensions, and we tell you that’s what we’re doing before we do it. The goal is a correct fit and a safe install, not a brand debate — the same standard we bring to DuraFlex in Rollingwood. If we don’t have the part on the truck, we can usually have it within a day or two, which means less downtime before you can burn again.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Garfield
Chimney cleaning and Level 2 inspection pricing depends on what we find once we’re on the roof or in the firebox. A routine sweep for a DuraFlex-equipped wood stove in Garfield will sit at one end of the range; adding a cap replacement, crown repair, or refractory panel replacement moves it up from there. What drives cost out here most often is access: multi-acre rural lots mean longer driveways, taller chases, and occasionally a ladder setup across uneven ground. That’s honest, and it’s why we give a written estimate before work begins after we’ve actually looked at the chimney. If you want an exact quote, call (855) 507-9184 and we’ll come out. Estimates are free, and you’ll know exactly what’s wrong before you agree to anything.
Serving Garfield, TX — Our Local Coverage Area
We’re based in the Garfield area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Garfield
You’ll usually hear movement or smell a distinct animal odor from the firebox when the damper is open. Look for grass, twigs, or droppings at the base of the flue. If the chimney has been uncapped since spring and you have mature trees within fifty feet of the house, assume something moved in. Call us at (855) 507-9184 and we’ll clear it safely before you light the first fire.
It depends on what the camera inspection shows. DuraFlex 316L liners hold up well under routine burning, but the idle humid summers here accelerate corrosion at the twist-lock joints. A Level 2 inspection with a camera tells us if the liner walls are still structurally sound or if the acidic condensate has pitted through. If it’s salvageable, we’ll say so. If not, we’ll show you the video and walk through your reline options, including HeatShield resurfacing when that’s a fit. Call (855) 507-9184 to schedule the inspection.
A cap with a full stainless steel mesh screen and a solid top that sheds rain sideways. The mesh is what stops raccoons and chimney swifts; without it, the cap is just a roof. We stock genuine DuraFlex multi-flue caps in the common sizes and swap them when the original screen has been pushed in or rusted through. Call (855) 507-9184 for an exact quote, and we’ll bring the right cap the first visit.
Most cracked crowns on DuraFlex factory-built units can be repaired with a proper crown-coat system rather than a full rebuild. We only recommend rebuilding when the chase structure itself is compromised. The freeze-thaw cracks we see around Garfield are typically surface-level spalling, and a crown coat seals them before water gets into the chase. We’ll tell you plainly which path fits your chimney after we inspect it. Call (855) 507-9184 to set that up.
Yes. A chimney is a system: the liner, the cap, the crown, the damper, and the firebox or insert all work together. Cleaning the liner while ignoring a warped damper or cracked refractory panel doesn’t leave you with a safe fireplace. Every DuraFlex service call in Garfield includes a firebox inspection, and we quote repair work on the spot when something’s wrong. Call (855) 507-9184 and we’ll handle the whole system in one visit.
Service Areas Near Garfield
We run DuraFlex service calls across far east Travis County and the surrounding communities. If you’re in DuraFlex service in Elgin, DuraFlex service in Buda, Cedar Park, Anderson Mill, or Brushy Creek, the same crew and the same DuraFlex parts knowledge apply. Our route coverage means a Garfield call usually doesn’t wait long, and we batch appointments through the corridor so rural stops stay efficient. If you’re in the broader Garfield service area, give us a call and we’ll get you on the schedule.
Book Your DuraFlex Service in Garfield Today
We’re independent, we know DuraFlex, and we know Garfield, and we handle DuraFlex repair in Wyldwood too. Before the first cold snap, get your flue cleared and your cap checked. Call Ashton Chimney at (855) 507-9184 for a free estimate, and we’ll have Nolan or one of our techs out to get eyes on your chimney.
Written by Nolan Pruett, Owner at Ashton Chimney, serving Garfield and far east Travis County.