Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across West Lake Hills
Dryer vent cleaning in West Lake Hills typically costs $189 – $325 for a standard single-story home with an accessible termination, with taller stone-chimney runs and camera-verified repairs adding from there. Most jobs are completed in 60 – 90 minutes, and we schedule West Lake Hills calls within a few days, not weeks. The catch in this part of the Hill Country is that many dryer vents don’t terminate at an exterior wall they run up through tall stone or masonry chimney chases, which means the lint screen and termination sit far out of sight from grade. That’s exactly the kind of setup we know how to work on. Call (855) 507-9184 for a free estimate.
We’re Ashton Chimney, led by Nolan Pruett, and we’ve spent years working on the custom homes that define West Lake Hills. These aren’t production-builder floor plans with short, straight vent runs. They’re 1970s-through-2000s custom builds on oak-covered limestone slopes, and the venting systems often share chases with fireplaces, gas-log inserts, and flues that were never designed to handle a dryer duct. We understand how those systems interact because dryer vent work is one of our three core services, alongside chimney sweep and repair. That matters when the problem is in the chase, not just the duct.
Key Takeaways:
- Dryer vent cleaning in West Lake Hills runs $189 – $325 for most homes before any repair work.
- Tall stone chases and shared flue paths are common here, and that’s where crushed flex and hidden lint jams live.
- We never recommend liner or cap work unless the camera footage shows it. You see what we see.
- West Lake Hills calls are scheduled within a few days, not weeks.
Why Ashton Chimney Is West Lake Hills’s Preferred Dryer Vent Cleaning Company
Most chimney companies in the Austin area don’t touch dryer vents. We do. That’s not a marketing line it’s a structural fact about how Ashton Chimney is built. We run three service lines under one roof: chimney sweep and inspection, dryer vent cleaning, and chimney repair including liner work with HeatShield and DuraFlex systems. So when a West Lake Hills homeowner calls us for a dryer vent and we find spalling mortar in the chase or a gas-log stack venting into the same cavity, we can actually do something about it. No hand-off to another contractor. No “that’s not our department.” One call covers the inspection, the cleaning, and any follow-up repair that the camera footage shows is needed.
Our reputation in West Lake Hills rests on a simple practice: we show you the problem before we recommend the fix. That’s rare in this market. West Lake Hills has a lot of high-end homes, and there are companies who see that zip code as a reason to pad an invoice. We see it as a reason to be more precise, because the homes are genuinely complicated. Nolan Pruett has built the company around camera-verified work. If we tell you the 4-inch flex behind your firebox is crushed flat, you’ll see it on the screen. If we tell you the termination cap is covered in oak pollen and a stuck flap is choking airflow, you’ll see that too. Nothing gets recommended without evidence you can look at yourself.
Response time to West Lake Hills is a regular part of our week. We’re based in Cedar Park, and the drive down 360 or across the Pennybacker Bridge into 78746 is one our techs make constantly. It’s not a special trip for us. That means scheduling is flexible, not “we’ll squeeze you in next month.” And because we work on these specific homes all the time, we arrive knowing what to expect: steep roofs, stone chases, multi-flue stacks, and dryer ducts that were an afterthought in a remodel.
Styles & brands we work with
Our Dryer Vent Cleaning Services in West Lake Hills
Dryer Vent Cleaning
A standard West Lake Hills dryer vent cleaning removes the lint, debris, and animal nesting material that accumulates inside the duct run. In these homes the run is often long, vertical, and partially hidden inside a chase, which means a visual check of the exterior termination tells you almost nothing about what’s happening 15 feet down the duct. We clean from the termination through the full run using rotary brushes sized to the duct, and we confirm the result with a camera before we leave. Lint that’s been accumulating for three or four years doesn’t just slow your dryer down it’s a documented fire risk. The leading cause of dryer fires is exactly this: neglected vent cleaning. In West Lake Hills, where lint screens sit high above oak-covered slopes and nobody checks them, the risk compounds quietly.
Dryer Vent Camera Inspection
If your dryer has been taking longer to dry, running hotter than it used to, or finishing a load with damp spots, the answer is in the duct. We run a camera through the full length of the vent, from the dryer connection to the exterior termination. In 78746 homes we routinely find crushed flex behind fireboxes, terminations sealed by leaf litter, and long unlined runs through stone chases that have never been scoped. The camera tells us what’s there. It also tells you. Before we recommend any repair, we review the footage with you on site. If the duct is clean and clear, we’ll say so and you’ll know nothing is being sold that isn’t supported by what the camera showed.
Dryer Vent Termination and Cap Repair
The termination is where West Lake Hills homes have the most trouble, for reasons unique to the area. A standard flap cap needs to open when the dryer runs and close when it’s off. On a heavily wooded lot off Westlake Drive or Redbud Trail, pollen, leaf litter, and the occasional squirrel can clog or jam that flap within a season. When the flap sticks shut, airflow drops to a fraction of what it should be and the dryer runs longer and hotter, baking lint into a hardened layer inside the duct. We repair or replace terminations, install backdraft dampers where the duct runs through a chase shared with an appliance stack, and make sure the cap sits properly above the slope so debris doesn’t pile against it. We use professional-grade parts from Famco and Copperfield for termination work. Not hardware-store substitutes.
Shared Chase and Gas-Log Interaction Checks
This is the West Lake Hills-specific service that generic dryer vent companies don’t offer. Many of these homes pair a wood or gas-log fireplace with a dryer vent running through the same stone chase. Heat from the fireplace stack attacks the dryer duct, and moisture from the dryer attacks the flue mortar. We inspect both during the same visit and tell you honestly whether the interaction is a problem. If the dryer duct is heat-damaged, we’ll show you. If the flue is spalled and the mortar is failing, we’ll show you that too. What we won’t do is use the shared chase as an excuse to inflate the job. We separate what needs to be done now from what can safely wait, and we put that in plain language.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Lake Hills
The products we install and service carry names that matter. We work with DuraFlex stainless liner systems, HeatShield flue resurfacing, Gelco caps and chase covers, Olympia Chimney components, Famco, and Copperfield. These are the brands chimney professionals specify for a reason they hold up in the heat and humidity of Central Texas and they’re rated for the application. When we replace a crushed flex run in a West Lake Hills stone chase, we don’t put another piece of cheap flex back in. We re-run rigid DuraFlex where the situation calls for it, and we stock the common parts for 78746 homes so we’re not making a second trip for a cap or a collar. You’ll know exactly what’s going into your home, because we name the products we install.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in West Lake Hills Homes
- Crushed or kinked flex behind a firebox. During a remodel, the dryer duct gets moved, pinched, or folded behind the firebox, and nobody checks it because the chase is sealed. The dryer still runs, so the homeowner assumes the vent is fine. It isn’t. We see this constantly off 2244 and St. Stephen’s School Road. The fix is straightforward once the camera shows the pinch: re-route the run with rigid DuraFlex.
- Terminations buried in oak pollen and leaf litter. The live-oak canopy in West Lake Hills is beautiful and relentless. It drops pollen in spring and leaves in fall, and a termination cap on a steep slope catches all of it. A stuck flap or a clogged screen chokes airflow silently. The dryer runs longer, the motor works harder, and lint packs into the duct from the termination backward.
- Ducts sharing a stone chase with a gas-log insert stack. This is a West Lake Hills signature. The dryer vent and the fireplace flue share a cavity, the insert stack radiates heat into the cavity, and the dryer duct gets baked every time the fireplace runs. That heat, combined with dryer moisture, attacks whatever is in the chase. We’ve found flex ducts that have started to delaminate and terminations warped from the heat. The pairing needs to be checked by someone who understands both systems.
- Long, unlined runs through tall stone chimneys that nobody has scoped. A 1970s custom home with a two-story stone chimney might have a dryer vent running 25 or 30 feet through the chase to clear the roof line. Nobody scopes those runs. They’re too long, too hidden, and too hard to reach. And inside, lint accumulates for years, mixed with spalled mortar dust and whatever else the chase has shed. By the time the dryer starts complaining, the duct is a fire hazard waiting for a heat source.
Pricing for Dryer Vent Cleaning in West Lake Hills, TX
Let’s talk real numbers. A standard dryer vent cleaning in West Lake Hills runs $189 – $325. That covers a single dryer, an accessible termination or a roof-level cap we can safely reach with our standard equipment, and a camera verification of the cleaned run. If the run is unusually long, if it disappears into a tall stone chase that requires roof access on a steep slope, or if the termination is in a spot that needs extra rigging, expect to be at the higher end of that range or slightly above. Repair work is priced after the camera shows what’s wrong. A crushed flex replace-and-re-route job typically adds $150 – $400 depending on length and access. A termination cap replacement with a Famco or Copperfield part runs $75 – $180 installed. We’ll give you a flat price before we start, and the estimate is free. Call (855) 507-9184 and we’ll talk through what your specific house needs.
We Also Serve Cities Near West Lake Hills
Our West Lake Hills service area reaches the surrounding Hill Country communities. We regularly schedule dryer vent cleanings in Lost Creek, up the hill into Austin proper, across to Barton Creek, and over in Rollingwood. If you’re in 78746, 78735, 78733, or just across the bridge, the same team that works the tall stone chases of West Lake Hills can get to you.
Serving West Lake Hills, TX — Our Local Coverage Area
We’re based in the West Lake Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in West Lake Hills
It can be safe, but only if the dryer duct is properly isolated from the fireplace stack and heat-rated for the application. The danger in West Lake Hills homes is that the gas-log insert radiates heat into the chase, which bakes the dryer duct over time, while the dryer dumps moisture into the cavity, which attacks the flue mortar. We check both during a visit and tell you honestly whether the setup is sound or needs correction. Nothing gets recommended without the camera footage to back it up. Call (855) 507-9184 and we’ll take a look.
Because the vent run is long, vertical, and likely partially obstructed. A tall stone chimney chase means your dryer is pushing air 25 or 30 feet up before it exits through a cap, often on a steep roof. Any lint buildup, crushed flex, stuck flap, or clogged termination cuts airflow and the dryer can’t clear the moisture in one cycle. In West Lake Hills, the obstruction is usually near the top of the run or in the chase, which is why climbing the roof and scoping the full duct is necessary. Call (855) 507-9184 for a free estimate and we’ll find where the restriction is.
In most cases with these homes, yes. The termination sits high on a stone chase above a steep slope, and cleaning the duct properly means working from that end and running the brush through the full run. There are companies who’ll clean only from inside the laundry room and call it done, but that misses the debris and damage that lives in the upper third of the run. We get on the roof, we have the rigging for steep pitches, and we verify the result with a camera so there’s no guessing. Call (855) 507-9184 to schedule a cleaning.
Yes, because the dryer vent is a separate system from the fireplace flue, and it runs every time you do laundry, which is often daily or near-daily. Your chimney might only see a handful of burn days in the Central Texas warmth, but that doesn’t matter for the dryer vent. Lint builds with every load, and in West Lake Hills the oak pollen, the wildlife, and the long hidden runs compound the problem. A vent that hasn’t been cleaned in three years is a fire hazard regardless of how often you use the fireplace. Call (855) 507-9184 if it’s been more than a year since your last cleaning.
No. We don’t recommend a flue liner, a cap, a crown repair, or anything else unless the camera shows it’s actually needed. If your dryer vent is the only thing on the work order, that’s what we focus on. If the inspection does reveal damage in the shared chase, we’ll show it to you on the camera screen and explain whether it needs attention now, later, or never. We use HeatShield and DuraFlex because they’re the right products when work is actually required, not because we’re looking for an add-on. You’ll never get a recommendation you can’t see for yourself. Call (855) 507-9184 for an honest assessment.
Written by Nolan Pruett, Owner at Ashton Chimney, serving West Lake Hills and the surrounding Hill Country.