Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Kyle
Dryer vent cleaning in Kyle typically runs $145 to $275 for a standard single-story home, and most jobs take under two hours from setup to final airflow test. We’re Ashton Chimney, and we service Kyle regularly from our Cedar Park base, usually booking within three to five business days. Nolan Pruett leads our team, and he’ll be the one answering your questions about what we find in your vent. Call (855) 507-9184 if your dryer is running hot, taking two cycles to finish a load, or if you can’t remember the last time anyone looked at the exhaust line.
Kyle’s housing stock has one distinct trait that affects dryer vent work here more than almost anywhere else we cover: nearly every home in Plum Creek, Waterleaf, and the newer master-planned sections off Kohlers Crossing was built between 2005 and 2023, and production builders ran dryer exhausts through the same utility chases as fireplace venting. That shared cavity is where most of our Dryer Vent Cleaning in Kyle calls start.
Why Ashton Chimney Is Kyle’s Preferred Dryer Vent Cleaning Company
We’re not a national franchise that sends a different tech every visit. The same crew that cleans your dryer vent can inspect the prefab fireplace on the same wall, because in Kyle those two systems often share framing, chases, and even the same exterior cap penetration. That cross-training matters. A dryer vent company that doesn’t know chimneys misses the bird nest in the damper. A chimney company that doesn’t do dryer vents walks right past the lint plug behind the firebox. We handle both, on one trip.
Local homeowners and property managers in Kyle call us because we name the parts we see: Copperfield caps, Olympia Chimney terminators, DuraFlex liner segments. When a builder spec’d a 4-inch metal vent but someone later patched in 3-inch foil flex, we catch it. When the aftermarket cap on the dryer vent doesn’t match the chimney cap next to it, we catch that too. The pattern repeats across Kyle’s subdivisions: newer home, generic replacement part, gap in the fit, and lint or birds working through the opening.
We keep our route through Kyle efficient. Calls in Plum Creek, Steeplechase, and down 1626 toward Niederwald get scheduled on the same corridor run, which keeps drive time out of your quote. We carry the common cap sizes and flex-to-rigid couplings Kyle homes need on the truck, so we rarely have to reschedule a job waiting on parts.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Kyle
Dryer Vent Lint Removal on Shared Utility Chases
This is the service most Kyle homes actually need, even if they don’t know it yet. Your production-built home likely has the dryer exhaust and the fireplace flue running through the same framed wall cavity behind the utility room. Lint that escapes the dryer’s internal filter doesn’t just collect in the flex hose; it piles up behind the prefab firebox where the builder tied the two vent runs together. We open the chase access, pull both runs, and clear the full length from dryer collar to exterior cap. In Plum Creek and the newer sections off Bunton Creek Road, we regularly find lint packed so tight behind the firebox chase that the dryer runs 20 degrees hotter than it should.
A standard dryer vent cleaning in Kyle runs $145 to $225, depending on run length and roof versus wall termination. We test airflow before and after with a manometer, so you’re not taking our word for it; you’re seeing the numbers.
Prefab and Factory-Built Fireplace Inspection During Your Dryer Vent Visit
Because so many Kyle homes use factory-built metal fireplaces rather than masonry, and because those units share chase space with dryer vents, we offer a prefab fireplace inspection as a companion to your dryer vent cleaning. We’re checking the firebox, the damper, the factory cap, and the chase floor for debris coming down from the flue. Builder-grade installations from the 2000s and 2010s often have mismatched aftermarket caps: the original manufacturer cap got dented or lost, and a generic replacement never sealed correctly. Birds find the gap. We document what we see and show you photos.
Adding this inspection to a dryer vent visit typically adds $125 to $175 in Kyle. If you’re already paying for the truck roll and the chase access, it’s the cheapest time to have a trained eye on the fireplace behind the same wall.
Cap and Vent Terminus Check for Bird and Wasp Nesting
Central Texas dry stretches give wasps and birds a long window to build into anything with an opening. Your exterior dryer vent cap, especially if it’s a flap style from the builder, loses its seal over time. Starlings and house sparrows get inside. We check every exterior termination when we’re on your Kyle roof or ladder, including the fireplace cap next to it. If the dryer cap has been replaced with a generic fit, we’ll show you where the gap is and quote the correct cap for your vent diameter.
Cap inspections are included with every Dryer Vent Cleaning service we perform in Kyle. Replacement caps, if needed, run $45 to $95 for common 4-inch terminations.
Run-Out Projects for Long or Obstructed Kyle Vents
Some Kyle homes, especially two-story plans in communities like Waterleaf, have dryer runs that travel 25 feet or more through interior walls before reaching outside. That’s beyond the manufacturer’s recommended maximum for most dryer models, and it’s a recipe for condensation, lint caking, and reduced airflow. When we encounter a run that length, we map it, measure it, and give you an honest assessment. Some runs can be cleaned effectively. Some need a booster fan or a reroute.
Run-out cleaning for long vents in Kyle runs $225 to $325, including full chase access and photo documentation. We don’t quote that work until we’ve seen the actual run length and condition. We will not replace or reroute your dryer duct blindly; we show you what we found before any additional work is approved.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kyle
Kyle’s newer homes tend to have venting from a small number of production builders, and most of those builders used Cooperfield chimney caps and Olympia Chimney terminators on the metal flue runs. We recognize those units by sight, and we carry the matching replacement parts on our trucks. If your prefab fireplace chase needs a new cap or a dryer run needs a rigid-to-flex coupling, you’ll get the manufacturer-spec part, not whatever the local hardware store had in stock. When a fireplace needs liner work, we specify and install DuraFlex stainless systems rated for the appliance. Our approach is simple: we name the products we install so you know exactly what’s going into your Kyle home, and we keep the common parts on hand so your job doesn’t stall waiting on a shipment.
Common Dryer Vent Cleaning Problems We See in Kyle Homes
- Builder-grade prefab caps swapped for generic aftermarket caps. On Kyle’s 2000s-to-2020s homes, the original fireplace cap gets damaged and someone installs an ill-fitting replacement from a big-box store. The loose fit lets birds into the damper cavity, and we see the identical mismatch on the dryer vent run in the same chase.
- Lint caked behind the prefab firebox. Production builders routed dryer flex and metal flue through one shared wall cavity. When the flex isn’t sealed, it discharges hot lint into that cavity. Homeowners don’t notice until the dryer runs hot or the utility room smells musty on laundry day.
- Long dry spells hardening lint into a plug. Central Texas heat bakes lint in the exterior wall stack until it forms a crust a shop vac can’t break loose. We’ve pulled vent sections in Kyle that were blocked along 70 percent of the run by hardened lint that had to be scraped out in chunks.
- Hard freezes loosening dryer duct connections. Kyle gets enough winter dips below freezing that uninsulated foil flex in exterior walls contracts and separates. The dryer then vents into the wall instead of out the cap, blowing damp air into the stud cavity while still showing a clear external cap.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Kyle, TX
We believe in quoting real numbers, not “surprise pricing after we look.” A standard dryer vent cleaning in Kyle, where the run is under 15 feet and terminates through an exterior wall, runs $145 to $225. Two-story homes with roof terminations run $200 to $275 because they take longer and require roof access or longer ladder work. If you add a prefab fireplace inspection during the same visit, that’s typically another $125 to $175. If your run needs a new cap, cap replacement parts are $45 to $95.
Several factors move the price within those ranges: run length, number of elbows, roof versus wall termination, and whether the chase has been opened before or is still builder-sealed. We give you the exact price before starting, and if we find something unexpected like a disconnected flex or a bird nest, we show you photos and quote only the additional work you approve. An estimate to inspect and clean is free when you schedule at (855) 507-9184.
We Also Serve Cities Near Kyle
We run regular routes from Cedar Park through South Austin down into Hays County, which means our Dryer Vent Cleaning coverage extends to the communities around Kyle: Buda, Manchaca, Onion Creek, and Shady Hollow. If you’re just over the city line in one of those areas, the same pricing and the same crew apply. Schedule by phone and we’ll work your address into the next Hays County run.
Serving Kyle, TX — Our Local Coverage Area
We’re based in the Kyle area and know this community well, and we also offer Gelco service in Kyle. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Kyle
Yes. In a 2018 Kyle home, the dryer has run hundreds of cycles, and every one of them pushed lint through a flex hose and into the wall stack. Newer homes are not exempt, especially where production builders used long runs or shared chases with fireplace venting. We find significant buildup in homes less than five years old on a regular basis. Call (855) 507-9184 to schedule a check; we’ll tell you if yours is fine.
Because in many Kyle tract homes, the dryer exhaust and the fireplace flue were run through the same framed utility chase by the builder. Lint escaping the dryer flex accumulates at the point where the two systems meet inside that wall, and it never clears itself. We clean both runs in one visit so the shared cavity stops collecting. The fix starts with a proper inspection, not just a brush through the vent.
Yes, and in Kyle we see it often. The dryer vent exterior flap, especially if it was replaced with a cheap plastic louver, lets starlings and sparrows push through. Once inside, they nest in the warm duct, and the blockage turns into a fire hazard. We’ll check the exterior cap on every visit and quote the correct replacement if the one you have isn’t sealing.
No. A dryer vent cleaning stands on its own in Kyle. But if you want the fireplace checked because it’s in the same chase, we can perform a Level 2 inspection for the unit behind the same wall. Many homeowners add it when they realize the chimney has never been looked at since the day they bought the house. The inspection is documented, photographed, and quoted separately; you decide what gets done.
For most Kyle homes, yes. The dryer and the fireplace share the same wall in so many of these floor plans that one truck roll saves you the coordination of two visits, and it lets us check both vent runs while the chase is open. If the chimney sweep reveals a bird nest in the cap, we’re already there to address the dryer run too. Call (855) 507-9184 and we’ll book both in one appointment, saving you a second service fee.
Call Ashton Chimney for Dryer Vent Cleaning in Kyle
If your dryer is taking longer than it used to, or your laundry room feels humid when the machine runs, the fix is usually behind the wall, not in the machine. We’ll open the chase, clear the run, check the cap, and show you what we found. Call (855) 507-9184 for a free estimate. We schedule Kyle calls three to five business days out, and we’ll tell you over the phone what the visit will cost before you commit.
Written by Nolan Pruett, Owner at Ashton Chimney, serving Kyle and Hays County from our Cedar Park headquarters.