Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Garfield
Dryer vent cleaning in Garfield, TX typically costs $120 – $260 depending on run length, and for most of the acreage properties along FM 973 we recommend a full brush-out with a rotary system every 12 months. Our techs cover Garfield regularly from Cedar Park, and we know the difference between a short run with a standard termination and the long roof-penetrating vents that are common out here. If your dryer is taking two cycles to dry a load or the laundry room smells warm when the machine is running, call (855) 507-9184 and we’ll take a look. We bring the same level of attention to your dryer vent that we bring to a chimney flue, because out here they fail for the same reason: neglect paired with a system that’s easy to ignore until something stops working.
Nolan Pruett, who leads Ashton Chimney, built this company around a simple idea. A venting system is a venting system, whether it exhausts smoke from a fireplace or hot, lint-heavy air from your dryer. Both need the same eye for clearances, terminations, and accumulated debris. In Garfield, where almost every home sits on multiple acres with private well and septic, the dryer vent is often the last thing on a homeowner’s mind until it isn’t.
Why Ashton Chimney Is Garfield’s Preferred Dryer Vent Cleaning Company
Garfield homeowners tend to handle a lot of their own maintenance, which we respect. But a dryer vent is one of those systems where the danger is invisible until the thermal fuse blows, or worse. We get called to homes off Hog Eye Road and Pope Bend where the dryer is ten years old, the vent has never been touched, and the lint has felted into a mat that a leaf blower won’t budge. Our team has cleaned enough of these to know what we’re going to find before we even pull the dryer away from the wall.
What separates us isn’t a slogan. It’s the fact that we name the materials we use. We run rotary brushes through the entire vent length, not just the first few feet. We replace crushed foil flex with solid DuraFlex duct where the run allows. And we explain, in plain language, what we found, what it means, and what your options are. No scare tactics, no invented hazards, just a straight read on the condition of the system. Nolan Pruett has built the company around that kind of honesty, and it’s why people in Garfield call us back when the chimney needs attention too.
Response time to Garfield is straightforward: we schedule by route, and we group calls along the 969 and 130 corridors whenever possible to keep the trip efficient. It’s about a 35-minute drive from our shop in Cedar Park, and we’ll give you a straight answer on when we can be there. You won’t get a four-hour window from us.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Garfield
Full Dryer Vent Brush-Out and Lint Removal
This is the core service, and in Garfield it’s almost never a quick job. Long runs through walls, crawl spaces, and up through the roof collect lint at every elbow, sag, and seam. Our techs feed a rotary brush through the full run from the dryer connection to the exterior termination, then run the brush back and clear what it loosens. We don’t just vacuum the first foot and call it done. For homes with roof terminations, which are common on the ranch-style and custom builds off FM 973, we access the exit point and work the entire length. Lint in a rural vent doesn’t just cut efficiency; it hardens against the duct walls with the humidity that builds when the dryer is used all summer with the AC running.
Dryer Vent Termination and Cap Screening
Uncapped exterior terminations are a constant problem on the wooded lots along the Colorado River corridor. Birds and squirrels get in, pack nests, and the nest traps lint against the flap until the vent is functionally closed. We inspect the termination on every job, clear whatever we find, and install a proper screen cap with openings that won’t choke airflow. The cap work alone has stopped repeat cleanings for more than a few Garfield homeowners. It’s the difference between cleaning a vent once and cleaning it every fall.
Transition Duct and Flex-to-Solid Duct Replacement
Behind nearly every dryer in Garfield sits a section of thin foil flex, often crushed against the wall, sometimes kinked, occasionally patched with tape. That’s where lint snags first. We replace the transition with a proper solid or semi-rigid metal duct, sized to the appliance, and route it with the shortest practical path to the main vent. For manufactured homes especially, where the original flex is often the only duct in the system, this change alone can cut drying time by a third. We’ll show you the old duct when we pull it. You can see the lint packed around the ridges with your own eyes.
Roof-Run Dryer Vent Cleaning
This is a Garfield specialty. When a dryer vent goes up through the roof rather than out a side wall, the run is longer, the bends are steeper, and the buildup is concentrated at the base of the vertical climb. Our techs access the roof termination, feed the brush down to the transition point, and clear the whole rise. Roof-run vents are also where we find the worst animal intrusion, because a roof termination flush with the shingles is an easy entry point for birds. Cleaning the full run from the roof is the only way to get it all, and we do it on a ladder with the same care we’d use on a chimney crown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garfield
Our Dryer Vent Cleaning team works with professional materials, not whatever is on the shelf at the hardware store. When a flex duct needs to be replaced out here, we use solid DuraFlex duct, the same name we specify for chimney liners. When a termination cap is missing, we install a Copperfield cap rated for the exposure. We also use Gelco products for vent sealing where the duct penetrates a wall or roof. These aren’t just brand names to us. They’re the materials that survive Texas humidity and hold up to the squirrels and raccoons that treat an uncapped vent like an open door. For Garfield customers, we keep the common sizes and parts on the truck so a re-duct doesn’t mean a second trip.
Common Dryer Vent Cleaning Problems We See in Garfield Homes
- Long roof-penetrating runs on multi-acre builds. The distance from the laundry room to the roof termination means lint gathers at every sag point, especially where the duct runs through an unconditioned attic. The dryer overheats slowly, so nothing fails all at once, and the first sign is usually a load taking forever to dry.
- Uncapped exterior terminations tucked against wooded lots. Along the Colorado River corridor and off FM 973, birds and squirrels find uncapped terminations fast. A nest packed into the duct traps lint and heat right where the flap needs to open, and the dryer runs hotter with every load.
- Crushed foil flex behind older and manufactured-home dryers. Ranch-style homes and manufactured units built with thin foil flex often have it jammed between the dryer and the wall, with ridges filled with lint and no way to brush it out. The fix is a re-duct, not a cleaning.
- Screws driven through duct walls during original builds. We see this often in owner-installed and custom rural construction. The screw tips pick up lint from day one, and the clog forms faster than you’d expect. A proper brush-out is partly about removing lint and partly about identifying where the duct itself is working against you.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Garfield, TX
A full dryer vent brush-out in Garfield runs $120 – $260 for most homes. The range comes down to two things: the length of the run and whether the termination is accessible from the ground or requires a ladder to the roof. A short side-wall run with easy access sits at the lower end. A roof termination on a two-story ranch-style build with 20 feet of vertical duct sits at the upper end. If we find a bird nest or a crushed flex duct that needs replacement, we’ll quote the additional work before we do it. You’ll know the number before the tool comes off the truck. Call (855) 507-9184 for a free estimate, and we’ll give you a straight range based on what you describe. No pressure, no invented urgency.
We Also Serve Cities Near Garfield
Beyond Garfield, our routes cover Hornsby Bend, Onion Creek, Wyldwood, and Rollingwood. If you’re in one of those communities, the drive is short, the service is the same, and the scheduling works the same way. Call us and we’ll get you on the route.
Serving Garfield, TX — Our Local Coverage Area
We’re based in the Garfield area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Garfield
Yes. We access the roof termination, feed the rotary brush down the full vertical rise, and clear the run from the top down. This is standard work for us in Garfield, where roof-penetrating vent runs are common. The cost is at the upper end of the range because the roof access adds time, but the whole run gets cleaned, not just the accessible portion. Call (855) 507-9184 and we’ll quote it based on your roofline and run length.
It does, because houses in Garfield that burn wood through the winter have more ambient dust and airborne lint than homes with electric-only heat. That dust ends up in the dryer vent along with the lint, and the result is a denser, stickier buildup. We clean dryer vents and chimneys, so if your wood stove is due for a sweep too, one trip covers both. Same team, same visit.
The signs are similar: long drying times, a hot laundry room, a musty or scorched smell. A bird nest usually comes with visible debris around the exterior termination, and sometimes you’ll hear birds or scratching where the duct runs through an attic or wall. The only way to know for sure is to run a camera or a brush through the full length, which is exactly what we do. Call (855) 507-9184 for an inspection, and we’ll tell you what’s in there, with a photo report included.
Foil flex is allowed behind the dryer as a transition, but in practice we almost never find it in good shape. It’s usually crushed, the ridges are packed with lint, and it needs replacement rather than cleaning. In manufactured homes around Garfield, the flex is often the only ducting in the system, and a crushed flex means the dryer vents into the wall cavity instead of outside. We replace it with solid DuraFlex duct and route it so future lint builds on a clean surface, not a folded one.
Every 12 months for most Garfield homes. If you dry clothes for more than two people, have a long roof-penetrating run, or keep the dryer in an unconditioned space, every 6 to 9 months is safer. The lint doesn’t care whether your house is rural or urban, but the long runs and open duct terminations out here mean it accumulates faster and in harder-to-reach places. Schedule a cleaning before the cottonwood and spring bird-nesting season hits, and you’ll avoid the worst of it. Call (855) 507-9184 to get on the calendar.
Contact Ashton Chimney for Dryer Vent Cleaning in Garfield
If your dryer is taking longer than it should, or you know the vent has never been cleaned since you bought the place, call us. We’ll walk you through what we can see over the phone, quote a range you can plan around, and schedule a visit that respects your time. One call covers the inspection, the cleaning, and any follow-up repair, from a lint-packed flex duct to a roof-run vent that hasn’t been touched since the original build. No hand-off to another contractor, no vague answers about what’s in your vent. Call (855) 507-9184 for a free estimate. Nolan Pruett and the Ashton Chimney team cover Garfield year-round.
Written by Nolan Pruett, Owner at Ashton Chimney, serving Garfield and surrounding Travis County communities.