Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Taylor
A chimney sweep in Taylor typically costs $189 – $289 for a standard fireplace cleaning with a Level 1 inspection, and most Taylor homes can be serviced within 3 – 5 business days. We run crews out of Cedar Park to Taylor regularly, so you’re not waiting on an out-of-town outfit that doesn’t know the difference between an original 1920s brick flue and a mid-century factory-built fireplace. Call (855) 507-9184 and we’ll get you on the schedule.
Taylor’s housing stock runs older than most Williamson County towns. That matters when we’re on your roof. The historic north side, the streets around Robinson Park, the brick ranches off Carlos G. Parker Boulevard: each of these has its own chimney profile. We know what we’re walking into before we pull the ladder off the truck.
Why Ashton Chimney Is Taylor’s Preferred Chimney Sweep Company
Taylor homeowners call us because we explain what we found in plain language, then show you the camera footage to back it up. No mystery diagnosis, no pressure to replace what doesn’t need replacing. If your flue can be restored with a HeatShield liner repair, we’ll tell you that. If it genuinely needs a DuraFlex stainless liner, we’ll show you why on the screen. Nolan Pruett runs every job with that standard, and the crew follows it.
We work in Taylor every week. That means the tech on your roof has seen a dozen chimneys like yours in this town in the last month. He knows Taylor’s brick-era downtown homes often lack modern liners. He knows the mid-century ranch houses have prefab fireplaces that need specialized cleaning, not a standard masonry sweep. And he knows the shared flues in attached older properties create cross-contamination risks most homeowners never think about until a neighbor’s gas exhaust starts drifting into their living space.
One company handles the sweep, the repair, and the sign-off. If your inspection turns up cracked flue tiles or a glazed creosote problem, you don’t get handed off to another contractor. We fix it. That’s why homeowners on both sides of Highway 79 keep our number in their phones.
Styles & brands we work with
Chimney Sweep Certified in Taylor
A Chimney Sweep in Taylor should mean more than a guy with a brush and a shop vac. It means a Level 1 or Level 2 inspection by someone who understands what Taylor’s older housing stock throws at you. The first cold front of the year sends us to the historic north side every single time, and what we find is often the same story: original brick chimneys that have never been inspected, with cracked flue tiles hiding behind decades of soot. We document everything with a camera so you see exactly what we saw.
Creosote and soot removal done right
A standard sweep removes first-degree and second-degree creosote before it becomes a fire risk. In Taylor, where fireplaces get used for ambiance more than heat, creosote builds up year after year without anyone noticing. Then a hard freeze hits, the fireplace runs hot for three straight nights, and that soft creosote bakes into glazed third-degree deposits that a basic brush won’t touch. We have the tools and chemicals to break glazed creosote down and get it out cleanly.
Level 1 and Level 2 inspections
A Level 1 inspection is the standard yearly check: accessible portions of the flue, the firebox, the cap. A Level 2 goes further with a camera scan of the full interior, which is what we recommend for any Taylor home where you’ve changed the fuel type, bought the house recently, or had a chimney that hasn’t been inspected in five-plus years. Given how many Taylor chimneys date to before World War II, Level 2 is often the smarter first call. A chimney sweep in Taylor with camera inspection runs $250 – $450 depending on access and flue condition.
Gas Fireplace Cleaning in Taylor
Gas Fireplace Cleaning in Taylor is not just vacuuming the fake logs. Factory-built gas units and gas inserts still accumulate dust, pet hair, and mineral buildup on the glass and burner, and a gas log set that burns dirty can put carbon monoxide into your living room instead of up the flue. We pull the logs, clean the burner, check the venting, and make sure the unit is drafting like it should. Taylor’s mid-century ranches with original gas logs are prime candidates for this service.
What the service includes
We remove the log set, clean the pilot assembly and burner ports, vacuum the firebox, clean or replace the ember material, and polish the glass if the unit has a glass front. Then we test the venting and confirm nothing is obstructing the flue path. If the unit shares a flue with another appliance, we verify there’s no cross-contamination between the two.
When Taylor homeowners need it
If you’re lighting a gas fireplace in a Taylor home more than once a week during winter, annual cleaning is right. If you notice soot streaking on the glass, a lazy yellow flame instead of a crisp blue one, or a smell coming from the unit when it runs, call sooner. A gas fireplace cleaning in Taylor runs $149 – $249 for a standard direct-vent or B-vent unit, and we’ll tell you if anything needs repair before we touch it.
Trusted Brands We Service in Taylor
We name the products we install, so you know exactly what’s going into your home. Our team works with Copperfield caps and dampers, DuraFlex stainless liner systems, and HeatShield’s manufacturer-backed flue restoration process. Those aren’t hardware store substitutes; they’re the brands chimney professionals specify. We keep common Copperfield cap sizes and DuraFlex components stocked on the truck, which means a straightforward chimney cap replacement or a liner section repair in Taylor doesn’t require a second trip.
Common Chimney Sweep Problems We See in Taylor Homes
- Glazed creosote from infrequent use. Taylor’s mild winters mean fireplaces sit dormant most of the year. Then a cold front slams down and the fireplace gets run hard for a week. The rapid temperature swing bakes soft creosote into a hard, shiny glaze that standard brushes can’t remove. We use mechanical and chemical treatments for that.
- Cracked flue tiles in original brick chimneys. Homes built in the 1910s through 1940s around downtown Taylor often have clay tile liners that are now 80 – 100 years old. Hairline cracks let heat and gases reach the brick and mortar. A camera inspection shows the damage clearly, and HeatShield can often restore the tile without a full teardown.
- Shared flue cross-contamination in attached housing. Taylor’s older attached and semi-attached properties sometimes share chimney structures. When one unit’s appliance exhausts into a shared stack with a cracked liner, gases can drift into the neighboring unit. If you smell gas or wood smoke when your own fireplace isn’t running, that’s a red flag. We trace the flue path and identify which appliance is venting where.
- Missing or rusted chimney caps. Central Texas gets wind, rain, and grackles. A missing cap on a Taylor chimney invites birds, leaves, and rainwater into the flue. Rain and creosote make a corrosive mix that eats away at masonry and steel. A Copperfield cap solves it for good.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Taylor, TX
Here’s what Taylor homeowners can expect to pay:
- Standard chimney sweep with Level 1 inspection: $189 – $289
- Chimney sweep with Level 2 camera inspection: $250 – $450
- Gas fireplace cleaning: $149 – $249
- Glazed creosote removal (chemical or mechanical): add $75 – $200 depending on severity
- Chimney cap replacement: $125 – $350 including materials and labor
What moves the price: roof pitch, flue height, whether the fireplace is on an interior or exterior wall, and how much creosote has accumulated. If your Taylor home has an original chimney that hasn’t been swept in years, plan for the higher end. We give you a firm quote before we start, and the estimate is free. Call (855) 507-9184 and we’ll talk through what you’ve got.
We Also Serve Cities Near Taylor
Ashton Chimney runs service to Chimney Sweep in Taylor and the surrounding Williamson County communities. You’ll see our trucks in Hutto, Round Rock, Pflugerville, and Windemere throughout the week. If you’re just outside Taylor’s city limits, give us a call and we’ll let you know when we’re next in your area.
Serving Taylor, TX — Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Taylor
Because infrequent burning creates exactly the conditions for glazed creosote to form. Taylor’s hot summers and mild winters mean most fireplaces sit unused for months at a time. When a cold front arrives and the fireplace finally gets used, rapid temperature swings bake whatever creosote is present into a hard, flammable glaze. Annual sweeping prevents that buildup before it can harden. If you burn less than once a week, every other year can work, but only if an inspection confirms low creosote levels. Call (855) 507-9184 for an honest assessment.
Shared flues are found in attached properties: duplexes, row-style older homes, and some downtown Taylor structures where two units were built against a single chimney stack. Look for two appliance connections entering the same masonry structure, or check your property record for terms like “common wall” or “shared chimney.” If you’re unsure, a Level 2 camera inspection maps the flue path and confirms what’s venting where. We’ll tell you what we found, what it means, and what your options are, in plain language.
First-degree creosote is a soft, sooty dust that brushes off easily. Third-degree creosote is a hard, tar-like glaze that has baked onto the flue walls and is both highly flammable and resistant to standard brushing. Taylor’s pattern of long idle periods followed by sudden heavy use is a classic recipe for third-degree creosote. Removing it requires chemical treatments or rotary scraping tools, not a basic sweep. A chimney sweep in Taylor that only brings a standard brush won’t remove it, and that’s a fire waiting to happen.
No, it needs a different process. Factory-built or prefab fireplaces use a metal flue system, not clay tile, and sweeping them with standard masonry tools can damage the flue. They require specialized brushes, different cleaning agents, and an understanding of the unit’s clearance requirements. Taylor’s mid-century ranch houses along Mallard Lane and the neighborhoods off Carlos G. Parker Boulevard commonly have these units. We clean them properly and inspect the metal flue for rust through the camera, so you know whether that fireplace is safe to keep using.
Because that’s when everyone in Taylor lights a fire at once, and problems that were invisible during the warm months suddenly show up: smoke backing into the room, strange smells, poor draft, or a chimney that won’t draw at all. After a cold snap, we were called to a 1920s home on North Main Street where the homeowner had been burning wood for ambiance. Our tech found first-degree creosote throughout the flue and a hairline crack in a tile that was letting gases seep into an adjacent flue shared with the neighbor’s gas appliance. We swept the flue, applied a HeatShield liner repair, and installed a chimney cap to keep out debris and animals. That kind of find is common on Taylor’s historic north side after the first hard freeze of the season.
Call Ashton Chimney in Taylor
If your Taylor chimney hasn’t been inspected in the last few years, or you just noticed something that doesn’t smell right, call (855) 507-9184 for a free estimate. We’ll schedule a time that works for you, show up when we say we will, and show you exactly what’s in your flue before we recommend anything. One company handles the sweep, the repair, and the sign-off.
Written by Nolan Pruett, Owner at Ashton Chimney, serving Taylor and Williamson County.